Hi All: I am using RH 7.1 with ide cd-writer it was working fine, I used it to make cd's and read cd's as well. On day all of a sudden when I ran #cdrecord -scanbus, the program just froze:
# cdrecord -scanbus Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 J�rg Schilling Linux sg driver version: 3.1.17 ^C gets me out of this, but no matter what I try I cannot get past this. Cdparanoia also complains. My ide-scsi driver seems to be ok. it is attached and functionning. I can mount and read cd's without problems. #cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 ... Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: MITSUMI Model: CR-2801TE Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 02 As you can see the drive is attached. I am beginning to think that it could be something with sg drive. Could it get corrupted when system lost power? I also read that there are some problems with 3.1.17 and should be upgraded to 3.1.19. Should I do it and if yes - how? Thanks. Igor. __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
