I've been having some issues with CDrecord and cd burning in general with cdrecord and redhat 7.3 with the 2.4.19 kernel but it happens with the 2.4.18-3 kernel too.
I have a HP CD-RW 24x10x40 and when burning at speeds higher than 8x the following error shows up Starting to write CD/DVD at speed 12 in dummy mode for single session. Last chance to quit, starting dummy write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 Track 01: 447 of 494 MB written (fifo 100%).cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 03 7E 47 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 03 7E DF 0A 00 00 00 00 0C 09 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0 Sense flags: Blk 229087 (valid) cmd finished after 0.057s timeout 40s write track data: error after 468858880 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 264.135s Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.021s cdrecord: fifo had 7449 puts and 7386 gets. cdrecord: fifo was 0 times empty and 5344 times full, min fill was 93%. Any ideas? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
