Hi, having some very old re-writable CDs from BASF which can be burned by 2speed.
My writer is a IDE plexwriter 24/10/40a (driven by SCSI emulation), my cdrecord version is 1.11a30, LINUX kernel 2.4.19. Problem: when I try to burn an image, cdrecord complains about a too low speed (see below; remark: WinON CD burnes correctly using 2speed when working on Windows XP): What I'm dowing wrong? Any help appreciated. CDRECORD command: cdrecord speed=2 fs=30m dev=2,0,0 gracetime=2 -data -v x.iso Output: scsidev: '2,0,0' scsibus: 2 target: 0 lun: 0 Linux sg driver version: 3.1.24 Cdrecord 1.11a30 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.6' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-W2410A' Revision : '1.03' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 2394336 = 2338 KB FIFO size : 31457280 = 30720 KB cdrecord: Write speed 2 of medium not sufficient for this writer. cdrecord: You may have used an ultra low speed medium on a high speed writer. cdrecord: fifo had 3 puts and 0 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 0%. Track 01: data 0 MB padsize: 472 KB Total size: 0 MB (00:04.02) = 302 sectors Lout start: 1 MB (00:06/02) = 302 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11635 (97:26/65) ATIP start of lead out: 337350 (75:00/00) speed low: 2 speed high: 2 power mult factor: 5 6 recommended erase/write power: 3 Disk type: Phase change Manuf. index: 3 Manufacturer: CMC Magnetics Corporation Blocks total: 337350 Blocks current: 337350 Blocks remaining: 337048 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
