Hello,
is it possible to burn without idescsi under 2.5.56?
I got:
Cdrecord-ProDVD-Clone 2.0 (i586-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling
Unlocked features: ProDVD Clone
Limited features: speed
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-500A '
Revision : '1.0f'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 8126464 = 7936 KB
FIFO size : 67108864 = 65536 KB
Track 01: data 3502 MB
Total size: 3502 MB = 1793056 sectors
Current Secsize: 2048
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 505440
Starting to write CD/DVD at speed 1 in real SAO mode for single session.
Last chance to quit, starting real write in 9 seconds. 0.28% done, estimate finish
Sun Jan 12 22:32:14 2003
0.56% done, estimate finish Sun Jan 12 22:29:15 2003
0.84% done, estimate finish Sun Jan 12 22:28:15 2003
1.12% done, estimate finish Sun Jan 12 22:27:45 2003
8 seconds. 1.39% done, estimate finish Sun Jan 12 22:28:39 2003
1.67% done, estimate finish Sun Jan 12 22:28:15 2003
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Track 01: 4 of 3502 MB written (fifo 99%) 13.1x.cdrecord-prodvd: Input/output
error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 08 B8 00 00 1F 00
status: 0x1 (GOOD STATUS)
resid: 63488
cmd finished after 0.011s timeout 100s
write track data: error after 4571136 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
Writing time: 5.315s
Average write speed 501.9x.
Fixating...
Fixating time: 84.976s
cdrecord-prodvd: fifo had 1095 puts and 73 gets.
cdrecord-prodvd: fifo was 0 times empty and 7 times full, min fill was 99%.
Exit 254
Should I compil again with ide-scsi?
Thank you very much,
Gr�goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
