Hello, I'm facing problems for recording Taiyo Yuden media on LG GCE-8580B recorders. Sometimes the record failed and sometimes not.
Here is the log file, any idea will be appreciated. Thanks for your help scsidev: '2,0,0' scsibus: 2 target: 0 lun: 0 Cdrecord 2.0 (i686-pc-cygwin) Copyright (C) 1995-2002 J�rg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnproof' atapi: -1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8520B ' Revision : '1.00' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1467136 = 1432 KB FIFO size : 4194304 = 4096 KB Track 01: data 28 MB Total size: 33 MB (03:16.18) = 14714 sectors Lout start: 33 MB (03:18/14) = 14714 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11849 (97:24/01) ATIP start of lead out: 359847 (79:59/72) Disk type: Long strategy type (Cyanine, AZO or similar) Manuf. index: 25 Manufacturer: Taiyo Yuden Company Limited Blocks total: 359847 Blocks current: 359847 Blocks remaining: 345133 Starting to write CD/DVD at speed 48 in real SAO mode for single session. Last chance to quit, starting real write in 9 seconds. 8 seconds 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... cdrecord: WARNING: Drive returns wrong startsec (0) using -150 Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 28 MB written. Track 01: 1 of 28 MB written (fifo 100%) [buf 98%] 0.6x. Track 01: 2 of 28 MB written (fifo 100%) [buf 99%] 21.5x. Track 01: 3 of 28 MB written (fifo 100%) [buf 99%] 22.1x.cdrecord: I/O e ror. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 06 4C 00 00 1F 00 status: 0x0 (GOOD STATUS) cmd finished after 0.033s timeout 200s Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 3301376 bytes Writing time: 21.874s Average write speed 11.5x. Min drive buffer fill was 99% Fixating... Fixating time: 3.193s cdrecord: fifo had 116 puts and 53 gets. cdrecord: fifo was 0 times empty and 43 times full, min fill was 95%. BURN-Free was 1 times used. Thierry PARET -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
