** Here is the status of the Linux-mountable dash-medium, that cannot be read by Windows:
dvd+rw-mediainfo /dev/scd0 INQUIRY: [_NEC ][DVD_RW ND-1300A ][1.08] GET [CURRENT] CONFIGURATION: Mounted Media: 11h, DVD-R Sequential READ DVD STRUCTURE[#0eh]: MediaID: VDSPMSAB 01 READ DVD STRUCTURE[#10h]: Media Book Type: 25h, DVD-R book [revision 5] Legacy lead-out at: 2298496*2KB=4707319808 READ DVD STRUCTURE[#0h]: Media Book Type: 25h, DVD-R book [revision 5] Last border-out at: 2298496*2KB=4707319808 READ DISC INFORMATION: Disc status: complete Number of Sessions: 1 State of Last Session: complete Number of Tracks: 1 READ TRACK INFORMATION[#1]: Track State: complete incremental Track Start Address: 0*2KB Free Blocks: 0*2KB Track Size: 1*2KB Last Recorded Address: 4294770688*2KB FABRICATED TOC: Track#1 : [EMAIL PROTECTED] Track#AA : [EMAIL PROTECTED] Multi-session Info: [EMAIL PROTECTED] ** Tail of proDVD-atip with this recorded medium: Manufacturer: 'VDSPMSAB 01' rzone number: 1 border number: 1 damage: 0 reserved: 0 blank: 0 incremental: 1 nwa valid: 0 rzone start: 0 next wr addr: 0 free blocks: 0 blocking factor: 16 rzone size: 1 last recorded addr: -196608 WARNING: Phys disk size 2298496 differs from rzone size 0! Prerecorded disk? WARNING: Phys start: 196608 Phys end 2495103 ** And here the output of proDVD if I try to record to a blank dash-medium: Starting to write CD/DVD at speed 2 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Turning BURN-Free off ./cdrecord-ProDVD: VTrack 0 has unknown length. ./cdrecord-ProDVD: Cannot open next track. Writing time: 0.033s Fixating... Fixating time: 0.000s ./cdrecord-ProDVD: fifo had 64 puts and 0 gets. ./cdrecord-ProDVD: fifo was 0 times empty and 0 times full, min fill was100%. FL -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
