Sorry if this is a repeat; my SMTP service is having some problems... > -----Original Message----- > From: Thomas J Magliery PhD [mailto:[EMAIL PROTECTED] > Sent: Monday, January 26, 2004 6:21 PM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Subject: Re: Re: Re: plextor px-708uf: cannot get disk type > > Joerg, I removed magicdev (rpm -e magicdev) and I *still* got this > error. (Lourens, I also saw this on Google; thanks for the suggestion.) > I removed the file Autorun.desktop from .kde/autostart and this > stopped the kernel/module message. (I probably should have mentioned I > use KDE, not GNOME.) > > Anyway, here is the bad news. After all that, I still get the following: > > ==================== > [EMAIL PROTECTED] magliery]# dvdrecord -atip dev=0,0,0 > dvdrtools v0.1.3 > Portions (c) 2002 Red Hat, Inc. > Based on: > Cdrecord 1.11a15 (i386-redhat-linux-gnu) Copyright (C) 1995-2001 J�rg > Schilling > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.1.24 > Using libscg version 'schily-0.5' > dvdrecord: Warning: using inofficial libscg transport code version > (schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c > 1.69 02/01/18 Copyright 1997 J. Schilling'). > Device type : Removable CD-ROM > Version : 2 > Response Format: 1 > Vendor_info : 'PLEXTOR ' > Identifikation : 'DVDR PX-708A ' > Revision : '1.04' > Device seems to be: Generic mmc2 DVD. > dvdrecord: Input/output error. get configuration: scsi sendcmd: no error > CDB: 46 00 00 21 00 00 00 01 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 > Sense Key: 0x0 No Additional Sense, Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.001s timeout 40s > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P > RAW/R96R > dvdrecord: Input/output error. read disk info: scsi sendcmd: no error > CDB: 51 00 00 00 00 00 00 00 24 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 > Sense Key: 0x0 No Additional Sense, Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.002s timeout 240s > dvdrecord: Cannot get disk type. > ============================= > > Apparently, the KDE automounter was not the (only) problem. Now what...? > > Tom >
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
