>From: Dave Huang <[EMAIL PROTECTED]>
>Ah, while I use the excellent cdrecord, I didn't know about libscg :)
>I had been working with dvd+rw-booktype from dvd+rw-tools, so they
>were at the top of my mind :)
It is the oldest SCSI transport code at all. I did write it first in August 1986,
long before Adaptec came out with ASPI.
>> -rw-r--r-- 1 root cdrecord 6905 Apr 29 14:10 btcflash-0.1-sspm.tar.bz2
>>
>> Is a SSPM file made from the Scgskeleton code and your code.
>> Just untar it in the cdrtools source root directory and call "make install"
>Thanks! I haven't had a chance to try it yet, but I think there's a
>minor bug with the conversion. The idea is to write the firwmare to
>the drive starting at offset 0x20, and write the checksum in offsets
>0x00 to 0x1f. (I suspect the order doesn't matter, but the Windows
>flash utility was writing the firmware first, then checksum, so I
>followed it).
Do you believe that the conversion from your *.cpp code to the
.c version introduced the bug?
I am quite sure that I did convert the code setp by step.
As I cannot check the code (I don't have such a drive), could you please
try to test the code?
J�rg
--
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni) If you don't have iso-8859-1
[EMAIL PROTECTED] (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
