On Mon, Dec 06, 2004 at 10:28:06PM -0500, Bill Davidsen wrote: > I've had mixed results using non-ide-scsi with 2.4 kernels. There has > been a lot of discussion on the kernel list on this (and I'm guilty of > starting part of it), and I've had no problems using ATAPI: with a 2.6 > kernel up to 48x but I'd rather not on 2.4. Uh, you'd rather not what on 2.4? Use ATAPI? Smart, as there's no DMA then at all, with ide-scsi you at least have DMA when writing data CD's.
> My puzzlement is not how to get around the issue, but why it happens. I > do appreciate the suggestion, As fas as I know, this is caused by a performance problem in your southbridge when doing PIO. Since there's no way to use DMA with Linux kernel 2.4 and audio CD writing, you're stuck with slow writes with them and any other kind of CD that has a sector size not multiple of 512 bytes, like VCD. I had this problem with VIA's notorious 686b southbridge. 12x audio burns were OK, 16x burns went actually at 14x or so and my machine was somewhat bogged down, but not totally. The number of IRQs generated was unbelievably high with 16x burns. Apparently the 16x LG writer I had back then was smart enough to limit write speed by itself. After I asked about this on lkml sometime in 2002, I was contacted by a couple of people with Intel hardware and the same problem. I was very surprised to hear that apparently Intel's ICH4 southbridge (or maybe ICH5, I've lost those mails) has this problem as well, even though Intel's much older PIIX3 does not... If you're interested, I got around this problem by switching to FreeBSD, then going back to Linux and getting a motherboard with SiS745 chipset, which had no problems with PIO and 16x burns. Current solution is Linux kernel 2.6. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
