Hi Andy, oh, I'm so stupid. I assumed that hardware / software does automaticly set the speed to a reasonable value. After trying with speed=2 instead of =4 the DVD-R was burned but still inaccessable. And now after playing around a long time I figured out that the media is designed for 1x ;-)
Nevertheless, I tried the version 5.13 as you recommended but I can't switch to speed=1 (error message, that growisofs can not switch to this speed). When I use 5.14 and speed=1 it burns with 2x. What can I do? thx + cu rasca On Thu, 11 Dec 2003 20:12:27 +0100 Andy Polyakov <[EMAIL PROTECTED]> wrote: > > This was fine. But after burning my first DVD I had a problem. > > May be you know the answer. > > > > My setup: BTC DVD+/-R/RW, Linux kernel 2.4.22, cdrecord 2.x > > > > Burning was done by > > growisofs -Z /dev/scd0=fuji.iso > > > > No errors or warning were given. But then if I try to > > mount it is see: > > > > attempt to access beyond end of device > > 0b:00: rw=0, want=34, limit=2 > > isofs_read_super: bread failed, dev=0b:00, iso_blknum=16, block=16 > > > > dvd+rw-mediainfo gives: > > INQUIRY: [DVDRW ][IDE1004 ][0040] > > GET [CURRENT] CONFIGURATION: > > Mounted Media: 11h, DVD-R Sequential > > Media ID: LD01 > > Current Write Speed: 4.0x1385=5540KB/s > > Write Speed #0: 4.0x1385=5540KB/s > > Write Speed #1: 2.0x1385=2770KB/s > > Write Speed #2: 1.0x1385=1385KB/s > > GET PERFORMANCE: > > Speed Descriptor#0: 00/2298496 [EMAIL PROTECTED] [EMAIL PROTECTED] > > READ DVD STRUCTURE[#10h]: > > Media Book Type: 25h, DVD-R book [revision 5] > > Legacy lead-out at: 2298496*2KB=4707319808 > > READ DVD STRUCTURE[#0h]: > > Media Book Type: 25h, DVD-R book [revision 5] > > Last border-out at: 0*2KB=0 > > READ DISC INFORMATION: > > Disc status: blank > > Number of Sessions: 1 > > State of Last Session: empty > > Number of Tracks: 1 > > READ TRACK INFORMATION[#1]: > > Track State: blank > > Track Start Address: 0*2KB > > Next Writable Address: 0*2KB > > Free Blocks: 2298496*2KB > > Track Size: 2298496*2KB > > > > A disk status of blank!? strange.. If I have a look > > at the surface of the dvd it looks burned.. > > > > Any ideas? > > Smells like media poorly supported by your firmware. I mean if surface > hue has changed and unit still recognizes media as blank, it sounds like > laser power was not enough during recording. You should a) try another > media brand, b) try to record at lower speed. As for the latter. Version > 5.14 introduces new speed selection code and given the dvd+rw-medainfo > output, it might fail. Problem is that units presents several "Write > Speed" descriptors, but only one "Performance" descriptor. This means > that you might have to use previous version 5.13 at least with this > media. I'd like to hear more about your experience with this [preferably > on the list]. A. > -- Welchen Unterschied macht es f�r die Toten, die Waisen und die Heimatlosen, ob irrsinnige Vernichtung im Namen der Diktatur oder im heiligen Namen der Freiheit und Demokratie geschieht? - Gandhi -
