Just a quick update but I have updated to Firmware version 0657, but this has made no effect.
Thanks Dave ---------- Original Message ----------- From: Dave Woodward <[EMAIL PROTECTED]> To: Andy Polyakov <[EMAIL PROTECTED]> Cc: Dave Woodward <[EMAIL PROTECTED]>, [email protected] Sent: Sun, 25 Apr 2004 11:05:52 +0100 Subject: Re: DVD+RW-Booktype and BTC 1008 Drive > I have modified the file dvd+rw-booktype.cpp with the patch > mentioned in msg00126.html, have added the extra reporting patch and > the additional patch from your last message, so that the source code > looks like the following: > > ------------------- > { // See if it's BTC design... > cmd[0]=0xFA; > cmd[4]=1; > cmd[10]=0xAA; > cmd[11]=0xFF; > if (!(err=cmd.transport()|| ASC(err)==0x24)) > return btc (cmd,action,book); > else if (ASC(err)==0x3A) > return fprintf (stderr,":-( BTC_FAh: no media mounted\n") > ,1; else sperror ("BTC_FAh",err); > -------------------- > case OPT_MEDIA: > if (profile!=0x1A) > { fprintf (stderr,":-( action is applicable to > DVD+RW only\n"); break; } > if (book != 0x92 && book != 0x01) { fprintf > (stderr,":-( BookType#%02x is not applicable\n",book); > break; } > #if 0 > cmd[0]=0x1E; // PREVENT/ALLOW MEDIA REMOVAL > cmd[4]=1; // "Prevent" > cmd[5]=0; > if ((err=cmd.transport())) > { sperror ("PREVENT MEDIA REMOVAL",err); > break; > } > #endif > cmd[0]=0xFE; > cmd[1]=2; > cmd[2]=book; > --------------------------- > obligatory = (profile==0x1A)?0x92:0x32; > if (book!=obligatory && book!=0x01) > { fprintf (stderr,":-( BookType#%02x is not > applicable\n",book); > break; > } > > cmd[0]=0x1E; // PREVENT/ALLOW MEDIA REMOVAL > cmd[4]=1; // "Prevent" > cmd[5]=0; > if ((err=cmd.transport())) > { sperror ("PREVENT MEDIA REMOVAL",err); > break; > } > --------------------------- > > However I seem to get the same error when I am trying to set the > booktype on a +R and a +RW as follows : > > [EMAIL PROTECTED] dvd+rw-tools-5.19.4.9.7]# > [EMAIL PROTECTED] dvd+rw-tools-5.19.4.9.7]# ./dvd+rw-booktype -dvd-rom- > spec -unit+r /dev/cdrom1 :-[ BTC_FAh failed with > SK=0h/ASC=00h/ACQ=01h]: Input/output error This program targets > units of RICOH, BENQ and BTC designs. /dev/cdrom1 doesn't appear to > be one. Exiting. [EMAIL PROTECTED] dvd+rw-tools-5.19.4.9.7]# [EMAIL > PROTECTED] > dvd+rw-tools-5.19.4.9.7]# ./dvd+rw-booktype -dvd-rom-spec -unit+r /dev/cdrom1 > :-[ BTC_FAh failed with SK=0h/ASC=00h/ACQ=01h]: Input/output error > This program targets units of RICOH, BENQ and BTC designs. > /dev/cdrom1 doesn't appear to be one. Exiting. > [EMAIL PROTECTED] dvd+rw-tools-5.19.4.9.7]# > > Could you please advise of anything further that may help. > > Thanks > > Dave > > Andy Polyakov wrote: > > >> I have made the modifications and here are the results for a +RW Disk > >> > >> [EMAIL PROTECTED] dvd+rw-tools-5.19.4.9.7]# ./dvd+rw-booktype > >> -dvd-rom-spec > >> -unit+r /dev/cdrom1 > >> :-[ BTC_FAh failed with SK=5h/ASC=24h/ACQ=00h]: Input/output error > >> This program targets units of RICOH, BENQ and BTC designs. > >> /dev/cdrom1 doesn't appear to be one. Exiting. > > > > > > Note > > http://lists.debian.org/cdwrite/2004/cdwrite-200404/msg00126.html. It > > obviously varies from firmware to firmware. In addition to the patch > > posted at above mentioned URL try modifying dvd+rw-booktype.cpp as > > following: > > > > if (!(err=cmd.transport()) || ASC(err)==0x24) > > return btc (cmd,action,book); > > else if (ASC(err)==0x3A) > > return fprintf (stderr,":-( BTC_FAh: no media mounted\n"),1; > > > > Note extra || ASC(err)==0x24 in first if statement. A. > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] ------- End of Original Message -------
