[EMAIL PROTECTED] wrote: > Hello > > I am ryting to record a CD-R using my LG 420B drive. The LG can blank the > media without a problem but when I try to burn an image this is what I got: > > Device type : Removable CD-ROM > Version : 2 > Response Format: 2 > Capabilities : > Vendor_info : 'HL-DT-ST' > Identifikation : 'DVDRAM GSA-4120B' > Revision : 'A112' > Device seems to be: Generic mmc2 DVD-R/DVD-RW. > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC-3 SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > Starting to write CD/DVD at speed 10.0 in real TAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > trackno=0 > cdrecord: Input/output error. write_g1: scsi sendcmd: no error > CDB: 2A 00 00 00 03 64 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 06 90 21 02 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.002s timeout 40s > write track data: error after 1777664 bytes > cdrecord: The current problem looks like a buffer underrun. > cdrecord: It looks like 'driveropts=burnfree' does not work for this drive. > cdrecord: Please report. > cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up. > cdrecord: Caught interrupt. > cdrecord: Caught interrupt. > cdrecord: Second interrupt. Doing hard abort. > > > Why doesn�t burnfree works for this drive since cdrecord says Driver flags > : > MMC-3 SWABAUDIO BURNFREE ?
http://cdrecord.berlios.de/old/private/problems.html Cdrecord did say _all_ that can be said: You don't have working DMA. Try to switch to an OS that supports DMA. J�rg -- EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin [EMAIL PROTECTED] (uni) [EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
