Steven Friedrich <[EMAIL PROTECTED]> wrote:
> >
> > J�rg
> Yes, I have two physical computers with mobile racks and I pull out winXP and
> put in freeBSD 4.11 or freeBSD 5.4 in each of them. I used to install
> multi-OSes on the same physical drive, but Microscrew made me sorry I ever
> did...
>
> I've been working this issue for about five days and have discovered that the
> problem only occurs with the specific combination of high speed media
> (Memorex 4x-12x) and freeBSD 4.11.
The first and important test in such cases is to run "cdrecord -toc"
with an _empty_ drive.
If you don't get an error messagelike this:
cdrecord dev=6,0 -toc
Cdrecord-ProDVD-Clone 2.01a24 (sparc-sun-solaris2.9) Copyright (C) 1995-2004
J�rg Schilling
scsidev: '6,0'
scsibus: 0 target: 6 lun: 0
Using libscg version 'schily-0.8'.
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W1210S'
Revision : '1.06'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE SINGLESESSION HIDECDR
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
cdrecord: I/O error. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 01 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x01 (medium not present - tray closed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!
You need to first fetch a working OS.
J�rg
--
EMail:[EMAIL PROTECTED] (home) J�rg Schilling D-13353 Berlin
[EMAIL PROTECTED] (uni)
[EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/
URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
