Hi, > I have an NEC 3540A along with Ritek Ridata 8x DVD-R's. > If i burn a DVD iso in windows with nero I get true 8x speed. > When I burn in linux with growisofs, my speeds vary from 1.5x-4x > which is horrible. Is there no 8x support yet?
As far as i know growisofs leaves the speed setting as proposed by the writer (unless you use the -speed= option). What speed is reported in its own start message ? Like in: About to execute 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0' /dev/sr0: "Current Write Speed" is 4.1x1385KBps. Varying speeds indicate rather a problem with the feeding of growisofs than with the writer. One should try to get the throughput steady before trying to improve speed from 4x to 8x. Throughput obstacles known to me: - Writing on the fly with a system where mkisofs cannot deliver a steady output stream of 4x speed. A fifo buffer in a separate process or thread can work wonders if the *average* output speed of mkisofs is high enough for full speed. The input of mkisofs can be hampered by the activities of growisofs and the burner (what do i expect from a mainboard which costs less than 50$ ?). In that case a fifo might help or help not. - Disadvantageous IDE address combinations and DMA settings can slow down the transfer from disk to writer independently of intermediate processes. I recently had the case where disk=hda + writer=hdb + highspeed DMA led to i/o errors which looked exactly like media failures but were clearly correlated to a special gesture of my own software. (To my luck that gesture was absolutely incapable of influencing burn success directly. So the storage location of some intermediate data was quickly spotted as the culprit.) In your situation i would also try cdrecord-ProDVD wether it is willing to set higher speed resp. wether it is telling some information about the problem. cdrecord-ProDVD got a builtin fifo. So you can check wether this would help with the varying throughput. I would also try both programs wether they can burn with steady throughput if fed by cheap dummy data. Like : dd if=/dev/zero bs=1M count=4482 | \ growisofs ... -Z /dev/sr0=/dev/fd/0 resp. cdrecord-ProDVD ... fs=32m speed=8 - (option -force might be worth a try, too) Have a nice day :) Thomas -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
