Hi, > > Vendor_info : 'HL-DT-ST' > > Identifikation : 'DVDRAM GSA-4082B' > > Revision : 'A201' > > I am not sure about the firmware/laser pule former quality of this > Hitachi Goldstar drive. I recommend to repeat this test with > a drive from Pioneer, Plextor or NEC > > > > 30 minutes later it is finished without further message. > > The burn attempt via cdrecord-ProDVD fails, nevertheless: > > SO the drive did show no problems for the second blank=full operation
I will keep the media for my next burner to come. :)) > > :-[ PERFORM OPC failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error > > If you use a program with user unfriendly output, please look up the error > code > and expand to text. Of course i got a copy of http://fy.chalmers.se/~appro/linux/DVD+RW/keys.txt The errors are listed and say the same as the cleartext messages of growisofs. Namley that OPC failed and that there occured a write error. > The biggest difference between DVD- and DVD+ is that > all DVD- manufacturers are forced to pay for an independent test institute > that does frequent round robin tests. Any problem is flagged to the related > manufacturers of failing pairings. At least for me and my drive the efforts to bribe away the gremlins have not paid off. But i can live with that for a while. Thanks for the advice about -force. I will keep that in mind for similar occasions. Have a nice day :) Thomas -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
