I'm using growisofs 6.1 and a Plextor 716A (ATAPI) burner under Linux. If I simulate writing of a 16x medium, setting a lower speed, e.g. 8x all is fine, but if I try to simulate another burn after the first at a faster speed, e.g 16x, the simulation speed is stuck to the previous 8x value. In fact if I check the inserted medium with: dvd+rw-mediainfo /dev/dvd I get: Mounted Media: 11h, DVD-R Sequential Current Write Speed: 8.0x1385=11080KB/s Write Speed #0: 16.0x1385=22160KB/s Write Speed #1: 12.0x1385=16620KB/s Write Speed #2: 8.0x1385=11080KB/s Write Speed #3: 6.0x1385=8310KB/s Write Speed #4: 4.0x1385=5540KB/s
I.e. the current write speed, after the first simulation, remains fixed to the first simulation speed. I've not found a way to reset Current Write Speed to the default 16x value. The only way is to restart the system. Is this a growisofs problem or a common firmware issue of my drive? TIA. Stefano -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
