cdrecord using ide-scsi returns an error that I don't understand. The burner can be used with dev=ATA:0,1,0, so I can't see how it is a device problem.
I am using ide-scsi for rscsi compatibility and remote burning. The error follows: # cdrecord dev=0,0,0 -dao -data dsl-1.1.iso Cdrecord-ProDVD-ProBD-Clone 2.01.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2007 Jörg Schilling scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.5.34 Using libscg version 'schily-0.9'. Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'SONY ' Identifikation : 'CD-RW CRX230E ' Revision : 'QYS1' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. Turning BURN-Free off cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. write_g1: scsi sendcmd: fatal error CDB: 2A 00 FF FF FF 89 00 00 1F 00 cmd finished after 0.000s timeout 200s write track pad data: error after 63488 bytes cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. read buffer cap: scsi sendcmd: fatal error CDB: 5C 00 00 00 00 00 00 00 0C 00 cmd finished after 0.000s timeout 200s cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. write_g1: scsi sendcmd: fatal error CDB: 2A 00 00 00 00 00 00 00 1F 00 cmd finished after 0.000s timeout 200s write track data: error after 0 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. test unit ready: scsi sendcmd: fatal error CDB: 00 00 00 00 00 00 cmd finished after 0.000s timeout 200s cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. flush cache: scsi sendcmd: fatal error CDB: 35 00 00 00 00 00 00 00 00 00 cmd finished after 0.000s timeout 200s Trouble flushing the cache cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. <snip> cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: faio_wait_on_buffer for writer timed out. cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. prevent/allow medium removal: scsi sendcmd: fatal error CDB: 1E 00 00 00 00 00 cmd finished after 0.000s timeout 200s cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. <snip> cdrecord: No such device or address. Cannot send SCSI cmd via ioctl. cdrecord: No such device or address. prevent/allow medium removal: scsi sendcmd: fatal error CDB: 1E 00 00 00 00 00 cmd finished after 0.000s timeout 200s The same error is returned with the more recent 2.01.01_alpha57. # uname -r 2.6.24-gentoo-r8 Any clues as to the cause of the error. Regards Fog_Watch -- Lose wait. Get Gentoo. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
