Andy: > It's of greater relevance/interest to look at dvd+rw-mediainfo for > *resulting* recording, not for blank media. There you should be able to > confirm that READ CAPACITY and/or lead-out position are adequate, > recording size / 2048 to be specific.
Here is the same command, but with a burned dvd-video: http://pastebin.com/f7d5beb2f If thats not what you were expecting, let me know which command should i run =) > Yes, it appears as similar problem, i.e. recording size is not divisible > by 32KB, it's DAO recording and the last write appears timing out. Can > you verify if workaround at the end of > http://www.mail-archive.com/[email protected]/msg12357.html helps > in your case too? As far as I understand K3b offers DAO as GUI > check-box, so you can as well let it be in order to make it work with > your unit. To do that, do i have to compile? Im not so experienced in that area, do i have to download the sources of growisofs, replace that text in that file, and then ./configure, make, make install? Will that be enough for K3B to use the new "patched" growisofs; or do i have to do something else? Im sorry, i know this must be really basic questions. Joerg: > BTW: Cdrecord does honor this firmware specific behavior > > ftp://ftp.berlios.de/pub/cdrecord/alpha/ I installed cdrecord: ~$ /opt/schily/bin/cdrecord -version Cdrecord-ProDVD-ProBD-Clone 2.01.01a36 (i686-pc-linux-gnu) Copyright (C) 1995-2007 J�rg Schilling (is that the original, or some fork? im still clueless about all the versions out there) But i cant get K3B to use it... I checked the "manual writing application selection", but it only allows me to select auto or growisofs. For the time, im using Nero LInux to burn video dvds. Thank you both. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
