Hello, Please see the issue I posted here with my new Pioneer BDR-205 fw 1.03: http://club.myce.com/f143/cant-close-session-bdr-205-external-macally-cm-s525u-308505/
I then found the following posts on this ML explaining quite similar problems: http://www.mail-archive.com/[email protected]/msg13071.html http://www.mail-archive.com/[email protected]/msg13093.html I followed the advice in the last post to try cdrskin instead, and this is what happened (0.7.6.pl00-2): $ mkisofs -rJ . | cdrskin -v dev=/dev/sr1 blank=format_if_needed [tried with speed=4 also] - cdrskin 0.7.6 : limited cdrecord compatibility wrapper for libburn cdrskin: verbosity level : 1 cdrskin: NOTE : greying out all drives besides given dev='/dev/sr1' cdrskin: scanning for devices ... I: -input-charset not specified, using utf-8 (detected in locale settings) [...] cdrskin: status 1 burn_disc_blank "The drive holds a blank disc" Current: BD-R sequential recording Track 01: data unknown length Total size: 0 MB (00:00.00) = 0 sectors Lout start: 0 MB (00:02/00) = 0 sectors Starting to write CD/DVD at speed MAX in real TAO mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 0 Track 01: 5 MB written (fifo 98%) [buf 25%] 4.0x. 0.04% done, estimate finish Mon Feb 8 11:09:41 2010 Track 01: 7 MB written (fifo 99%) [buf 40%] 1.3x.cdrskin: FATAL : SCSI error on write(3632,16): [5 21 02] Invalid address cdrskin: thank you for being patient for 20 seconds Track 01: Total bytes read/written: 7471104/7438336 (3632 sectors). Writing time: 19.746s Cdrskin: fifo had 5727 puts and 3679 gets. Cdrskin: fifo was 0 times empty and 1160 times full, min fill was 97%. Min drive buffer fill was 0% cdrskin: burning failed cdrskin: FATAL : burning failed. No errors in dmesg (aside from those related to inserting the blank disc). Then I tried the same command again: [...] cdrskin: ... scanning for devices done cdrskin: status 3 BURN_DISC_APPENDABLE "There is an incomplete disc in the drive" Current: BD-R sequential recording cdrskin: beginning to burn disc cdrskin: status 3 BURN_DISC_APPENDABLE "There is an incomplete disc in the drive" Current: BD-R sequential recording Track 01: data unknown length Total size: 0 MB (00:00.00) = 0 sectors Lout start: 0 MB (00:02/00) = 0 sectors Starting to write CD/DVD at speed MAX in real TAO mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Starting new track at sector: 3616 cdrskin: thank you for being patient for 3 seconds cdrskin: FATAL : SCSI error on write(0,16): [5 21 02] Invalid address Track 01: Total bytes read/written: 32768/0 (0 sectors). Writing time: 3.825s Cdrskin: fifo had 2095 puts and 47 gets. Cdrskin: fifo was 0 times empty and 0 times full, min fill was 100%. Min drive buffer fill was 50% cdrskin: burning failed cdrskin: FATAL : burning failed. So I'm baffled how to simply write an ISO filesystem to a Blu-Ray disc without errors... -- Ryan C. Underwood, <[email protected]> -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
