Hi, > https://bugs.launchpad.net/ubuntu/+source/cdrkit/+bug/15424?comments=all
Wow. That's a collection of several different problems. Growing since years. Very funny are the many "the same error" statements. (All problems are the same. But some are more same than others.) "SK=5h/ASC=64h/ACQ=00h" means that the drive does not like the state of the medium: "ILLEGAL MODE FOR THIS TRACK". One can get this when attempting to write to non-blank DVD-RW. It can even be caused by automounter interference. ":-( unable to WRITE@LBA=0h: Input/output error" Could be caused by an automounter, too. If it was a DVD-R[W] medium. "COMMAND SEQUENCE ERROR" @LBA 0h. Is media being read?" And again an automounter. (They are so shitty that they change with every distro release.) ":-[ WRITE@LBA=200h failed with SK=4h/ASC=08h/ACQ=03h]: Input/output error" Is a hardware problem: "LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)" ":-[ WRITE@LBA=0h failed with SK=3h/ASC=73h/ACQ=03h]: Input/output error" The medium is worn off "POWER CALIBRATION AREA ERROR". "mkisofs: Directories too deep" Is not related to burning but to ISO 9660 production. "Sense Key: 0x3 Medium Error, Segment 0" A rotten medium reported by wodim. "Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0" I can only guess what the drive might mean with "write protected". "BraseroGrowisofs stderr: :-[ WRITE@LBA=0h failed with SK=3h/WRITE ERROR]:" Drive hates medium. "Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (logical block address out of range)" Probably an automounter interfering. "md5sum: /dev/scd0: Input/output error" One should eject and reload before accessing freshly written media via the block device driver. ":-[ WRITE@LBA=1d3500h failed with SK=3h/POWER CALIBRATION AREA ERROR]:" Rotten DVD-R DL medium. (Died out, commercially.) ":-[ WRITE@LBA=10h failed with SK=0h/ASC=00h/ACQ=02h]: Input/output error" This one could be ours. But it comes too early. Note the implausible SK=0, which means "no error". I suspect "Descriptor". ":-[ WRITE@LBA=1f0e80h failed with SK=0h/ASC=00h/ACQ=02h]: Input/output error" Once again the ill SK=0. This time at the layer break of a DVD+R DL. No DVD DAO. Surely aligned to 16 blocks. Have a nice day :) Thomas -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
