On Tue 27 Oct 2015 03:41:13 NZDT +1300, Joerg Schilling wrote: > This is a preliminary (alpha) release, do the version.h file was not edited.
So when I tell you I've tested with version "3.01", because that's what it tells me, you know exactly which of the heap of varieties I'm talking about? Fine by me, you're the expert of your software... Here's the drive list. I use output like this as a measure that your fix is working: 100% track 15 recorded successfully 100% track 17 recorded with minor problems 100% track 19 recorded with minor problems (0.2% problem sectors) 100% track 8 recorded with audible hard errors The bad version only outputs lines like this: 100% track 13 recorded with audible hard errors No drives with bad output found. These drives produce good output: Lite-on, fresh from the shop Type: ROM, Vendor 'ATAPI ' Model 'iHAS124 F ' Revision 'CL07' MMC+CDDA Stoneage CD-RW: Type: ROM, Vendor 'HP ' Model 'CD-Writer+ 8100 ' Revision '1.0g' MMC+CDDA LG, appr 5y old: Type: ROM, Vendor 'HL-DT-ST' Model 'DVDRAM GH22LS50 ' Revision 'TL03' MMC+CDDA Laptop drive, appr 4-5y old Type: ROM, Vendor 'MATSHITA' Model 'DVD+-RW UJ8B1 ' Revision 'D.04' MMC+CDDA Old Sony/NEC/Optiarc CD-RW: Type: ROM, Vendor 'Optiarc ' Model 'DVD RW AD-7200S ' Revision '1.R1' MMC+CDDA I have these to test as well but would need to re-arrange hardware. It's not much point because it's clear it's working again. Type: ROM, Vendor 'CDWRITER' Model 'IDE5232 ' Revision '000R' MMC+CDDA Type: ROM, Vendor 'PIONEER ' Model 'DVD-RW DVR-106D' Revision '1.08' MMC+CDDA I'm not totally sure but occasionally I had the feeling the 3.01 has a slightly lower final read error rate. Thanks muchly for improvement! Volker -- Volker Kuhlmann http://volker.top.geek.nz/ Please do not CC list postings to me.