This seems timely, given the recent no-MMU discussion...
-------- Original Message --------
Subject: Running linux with mmu disabled on arm (AT91).
Date: Tue, 1 May 2012 08:24:48 -0700
From: Paul Chavent <paul.chav...@fnac.net>
To: linux-arm-ker...@lists.infradead.org
<linux-arm-ker...@lists.infradead.org>, nicolas.pi...@linaro.org
<nicolas.pi...@linaro.org>, t...@atomide.com <t...@atomide.com>,
hswee...@visionengravers.com <hswee...@visionengravers.com>,
rob.herr...@calxeda.com <rob.herr...@calxeda.com>,
uclinux-...@uclinux.org <uclinux-...@uclinux.org>, ucl...@uclibc.org
<ucl...@uclibc.org>, buildr...@busybox.net <buildr...@busybox.net>
Hi.
I'd like to try linux on an AT91SAM9G20 (i have a linuxstamp board), with MMU
disabled (the Hyok-Sung Choi& Hee-Chul Yun paper demonstrate that it could be
possible).
All the code seems to be present in the kernel...
So i would like to share my experience.
(1) I had to make two little changes in the kernel code :
- I'm not able to change the REMAP_VECTOR_TO_DRAM. I have submitted the
problem to the kbuild mailing list
(http://www.spinics.net/lists/linux-kbuild/msg06153.html).
- The soc_detect code that init the at91_soc_initdata structure is never
called. Later this structure is used unitialized.
I'm currently using the joined patch as a workaround. Someone can review
it please ?
(2) I used to run the module with a "classic system" based on linux + eglibc,
and i needed only one toolchain (arm-xxx-linux-gnueabi) for the kernel and the userspace
apps.
I found that for the nommu case i wasn't able to build the kernel with the
userspace toolchain.
So I had to build 2 toolchain, based on binutils 2.22, gcc 4.7, uclibc
0.9.33.1 and linux 3.2.14 :
- an arm-xxx-eabi toolchain for the kernel
- an arm-xxx-uclinux-uclibceabi for the userspace apps
Do you confirm that it is not possible to compile the kernel with
arm-xxx-uclinux-uclibceabi ? Or, may i have misconfigured the toolchain (i join
the toolchain build procedure) ?
(3) The arm-xxx-uclinux-uclibceabi with elf2flt seems to produce running bins
only if it is build with the uClibc DOPIC not set.
Is it required to disable DOPIC ?
Moreover, i can't run bins produced with a arm-xxx-linux-uclibceabi
toolchain and -Wl,-elf2flt (not uclinux one). Is it the expected behavior ?
(4) The elf2flt needs to be updated to be aware of the exidx section, and some
reloc types. I join the patch i currently use.
Given these observations, i've been able to run a linux with an hello world as
the /init process.
My next tests will be to run threaded programs, c++ programs, then busybox.
Thanks for your attention.
Paul.
diff -abBruN linux-3.2.14.orig/arch/arm/Kconfig-nommu
linux-3.2.14.mod/arch/arm/Kconfig-nommu
--- linux-3.2.14.orig/arch/arm/Kconfig-nommu 2012-04-02 18:53:31.000000000
+0200
+++ linux-3.2.14.mod/arch/arm/Kconfig-nommu 2012-04-15 12:52:05.000000000
+0200
@@ -34,8 +34,7 @@
used instead of the auto-probing which utilizes the register.
config REMAP_VECTORS_TO_RAM
- bool 'Install vectors to the beginning of RAM' if DRAM_BASE
- depends on DRAM_BASE
+ bool 'Install vectors to the beginning of RAM'
help
The kernel needs to change the hardware exception vectors.
In nommu mode, the hardware exception vectors are normally
diff -abBruN linux-3.2.14.orig/arch/arm/mm/nommu.c
linux-3.2.14.mod/arch/arm/mm/nommu.c
--- linux-3.2.14.orig/arch/arm/mm/nommu.c 2012-04-02 18:53:31.000000000
+0200
+++ linux-3.2.14.mod/arch/arm/mm/nommu.c 2012-04-16 15:50:47.000000000
+0200
@@ -31,12 +31,23 @@
{
}
+static void __init devicemaps_init(struct machine_desc *mdesc)
+{
+ /*
+ * Ask the machine support to map in the statically mapped devices.
+ */
+ if (mdesc->map_io)
+ mdesc->map_io();
+}
+
/*
* paging_init() sets up the page tables, initialises the zone memory
* maps, and sets up the zero page, bad page and bad page tables.
*/
void __init paging_init(struct machine_desc *mdesc)
{
+ devicemaps_init(mdesc);
+
bootmem_init();
}
>From bd2014eb59dea812e396a5f299f53ed03629bdad Mon Sep 17 00:00:00 2001
From: Paul Chavent <pchav...@wdcsd911h.onecert.fr>
Date: Fri, 27 Apr 2012 10:09:20 +0200
Subject: [PATCH] Update arm support.
---
.gitignore | 1 +
Makefile.in | 2 +-
arm-elf2flt.ld | 221 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
elf2flt.c | 27 +++++++
4 files changed, 250 insertions(+), 1 deletions(-)
create mode 100644 arm-elf2flt.ld
diff --git a/.gitignore b/.gitignore
index 92ff5f6..e0e0bd5 100644
--- a/.gitignore
+++ b/.gitignore
@@ -22,3 +22,4 @@ elf2flt
elf2flt.ld
flthdr
ld-elf2flt
+ld-elf2flt.sh
\ No newline at end of file
diff --git a/Makefile.in b/Makefile.in
index 81e1afc..f98421e 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -42,7 +42,7 @@ ifneq ($(strip $(shell gcc -v 2>&1 | grep "cygwin")),)
endif
LDFILE= elf2flt.ld
-ifeq ($(strip $(CPU)),e1)
+ifeq ($(filter-out e1 arm,$(CPU)),)
SRC_LDFILE= $(srcdir)/$(CPU)-elf2flt.ld
else
SRC_LDFILE= elf2flt.ld
diff --git a/arm-elf2flt.ld b/arm-elf2flt.ld
new file mode 100644
index 0000000..b57999c
--- /dev/null
+++ b/arm-elf2flt.ld
@@ -0,0 +1,221 @@
+
+ENTRY (_start)
+
+MEMORY {
+ flatmem : ORIGIN = 0x0, LENGTH = 0x1000000
+}
+
+PHDRS {
+ text PT_LOAD ;
+ data PT_LOAD ;
+}
+
+SECTIONS {
+
+ .text 0x0 : {
+ . = ALIGN(0x4) ;
+ _stext = . ;
+ *(.text)
+ *(.text.*)
+ *(.gnu.warning)
+ *(.stub)
+ *(.gnu.linkonce.t*)
+ *(.glue_7t)
+ *(.glue_7)
+ *(.vfp11_veneer)
+ *(.jcr)
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+W_RODAT *(.rodata)
+W_RODAT *(.rodata1)
+W_RODAT *(.rodata.*)
+W_RODAT *(.gnu.linkonce.r*)
+
+ /* .ARM.extab name sections containing exception unwinding
information */
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ /* This is special code area at the end of the normal
+ text section. It contains a small lookup table at
+ the start followed by the code pointed to by entries
+ in the lookup table. */
+ . = ALIGN (4) ;
+ PROVIDE(__ctbp = .);
+ *(.call_table_data)
+ *(.call_table_text)
+ } > flatmem :text
+
+ /* .ARM.exidx name sections containing index entries for section
unwinding */
+ /* .ARM.exidx is sorted, so has to go in its own output section. */
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > flatmem
+ __exidx_end = .;
+
+ . = ALIGN(0x20) ;
+ _etext = . ;
+
+ .data : {
+ . = ALIGN(0x4) ;
+ _sdata = . ;
+ __data_start = . ;
+ data_start = . ;
+ *(.got.plt)
+ *(.got)
+ FILL(0) ;
+ . = ALIGN(0x20) ;
+ LONG(-1)
+ . = ALIGN(0x20) ;
+R_RODAT *(.rodata)
+R_RODAT *(.rodata1)
+R_RODAT *(.rodata.*)
+R_RODAT *(.gnu.linkonce.r*)
+ *(.data)
+ *(.data1)
+ *(.data.*)
+ *(.gnu.linkonce.d*)
+
+ /* Microblaze has .sdata and .sbss (small bss). They must
+ be contiguous, so please don't move any of this. JW */
+ _ssrw = . ;
+ *(.sdata)
+ *(.sdata.*)
+ *(.sbss) /* Don't move this! */
+ *(.gnu.linkonce.sb*)
+ _essrw = . ;
+
+ _ssrw_size = _essrw - _ssrw;
+ PROVIDE(_SDA_BASE_ = _ssrw + (_ssrw_size / 2));
+
+ *(.gnu.linkonce.s.*)
+ *(__libc_atexit)
+ *(__libc_subinit)
+ *(__libc_subfreeres)
+
+ /* microblaze-specific read-only small data area
+ and associated locating symbols */
+ _ssro = . ;
+ *(.sdata2)
+ _essro = . ;
+ _ssro_size = _essro - _ssro;
+ PROVIDE(_SDA2_BASE_ = _ssro + (_ssro_size / 2));
+
+ . = ALIGN(4) ;
+TOR: __CTOR_LIST__ = .;
+TOR: LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
+SINGLE_LINK: /* gcc uses crtbegin.o to find the start of
+SINGLE_LINK: the constructors, so we make sure it is
+SINGLE_LINK: first. Because this is a wildcard, it
+SINGLE_LINK: doesn't matter if the user does not
+SINGLE_LINK: actually link against crtbegin.o; the
+SINGLE_LINK: linker won't look for a file to match a
+SINGLE_LINK: wildcard. The wildcard also means that it
+SINGLE_LINK: doesn't matter which directory crtbegin.o
+SINGLE_LINK: is in. */
+SINGLE_LINK: KEEP (*crtbegin*.o(.ctors))
+SINGLE_LINK: /* We don't want to include the .ctor section from
+SINGLE_LINK: from the crtend.o file until after the sorted ctors.
+SINGLE_LINK: The .ctor section from the crtend file contains the
+SINGLE_LINK: end of ctors marker and it must be last */
+SINGLE_LINK: KEEP (*(EXCLUDE_FILE (*crtend*.o ) .ctors))
+SINGLE_LINK: KEEP (*(SORT(.ctors.*)))
+ KEEP (*(.ctors))
+TOR: LONG(0)
+TOR: __CTOR_END__ = .;
+TOR: __DTOR_LIST__ = .;
+TOR: LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)
+SINGLE_LINK: KEEP (*crtbegin*.o(.dtors))
+SINGLE_LINK: KEEP (*(EXCLUDE_FILE (*crtend*.o ) .dtors))
+SINGLE_LINK: KEEP (*(SORT(.dtors.*)))
+ KEEP (*(.dtors))
+TOR: LONG(0)
+TOR: __DTOR_END__ = .;
+
+ PROVIDE (__preinit_array_start = .);
+ KEEP (*(.preinit_array))
+ PROVIDE (__preinit_array_end = .);
+
+ PROVIDE (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ PROVIDE (__init_array_end = .);
+
+ PROVIDE (__fini_array_start = .);
+ KEEP (*(.fini_array))
+ KEEP (*(SORT(.fini_array.*)))
+ PROVIDE (__fini_array_end = .);
+ } > flatmem :data
+
+ .note.ABI-tag : { *(.note.ABI-tag) } > flatmem
+ .eh_frame_hdr : { *(.eh_frame_hdr) } > flatmem
+ .eh_frame : { KEEP(*(.eh_frame)) } > flatmem
+ .gcc_except_table : {
+ KEEP(*(.gcc_except_table))
+ KEEP(*(.gcc_except_table.*))
+ } >flatmem
+
+ . = ALIGN(0x10) ;
+ _edata = . ;
+
+ .bss : {
+ . = ALIGN(0x4) ;
+ _sbss = ALIGN(0x4) ;
+ __bss_start = . ;
+ *(.dynsbss)
+ *(.sbss)
+ *(.sbss.*)
+ *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(.bss.*)
+ *(.bss*)
+ *(.gnu.linkonce.b*)
+ *(COMMON)
+ . = ALIGN(0x10) ;
+ _ebss = . ;
+ _end = . ;
+ end = . ;
+ } > flatmem
+
+ .stack : {
+ . = ALIGN(0x4);
+ _stack_start = .;
+ }
+
+ .junk 0 : { *(.rel*) *(.rela*) }
+ /DISCARD/ : { *(.note.GNU-stack) }
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+}
diff --git a/elf2flt.c b/elf2flt.c
index 2fea9b5..1a7ef88 100644
--- a/elf2flt.c
+++ b/elf2flt.c
@@ -54,6 +54,8 @@ const char *elf2flt_progname;
#if defined(TARGET_h8300)
#include <elf/h8.h> /* TARGET_* ELF support for the BFD library
*/
+#elif defined(TARGET_arm)
+#include "elf/arm.h"
#elif defined(__CYGWIN__) || defined(__MINGW32__) || defined(TARGET_nios) ||
defined(TARGET_nios2)
#include "cygwin-elf.h" /* Cygwin uses a local copy */
#elif defined(TARGET_microblaze)
@@ -639,12 +641,16 @@ dump_symbols(symbols, number_of_symbols);
relocation_needed = 1;
break;
case R_ARM_REL32:
+ case R_ARM_JUMP24:
+ case R_ARM_CALL:
case R_ARM_THM_PC11:
case R_ARM_THM_PC22:
case R_ARM_PC24:
case R_ARM_PLT32:
case R_ARM_GOTPC:
case R_ARM_GOT32:
+ case R_ARM_PREL31:
+ case R_ARM_NONE:
relocation_needed = 0;
break;
default:
@@ -1702,6 +1708,27 @@ int main(int argc, char *argv[])
}
}
+ if (verbose) {
+ printf(" verbose = %d\n"
+ " load_to_ram = %d\n"
+ " ktrace = %d\n"
+ " docompress = %d\n"
+ " pfile = \"%s\"\n"
+ " ofile = \"%s\"\n"
+ " use_resolved = %d\n"
+ " stack = %d\n"
+ " rel_file = \"%s\\n",
+ verbose ,
+ load_to_ram ,
+ ktrace ,
+ docompress ,
+ pfile ,
+ ofile ,
+ use_resolved,
+ stack ,
+ rel_file );
+ }
+
/*
* if neither the -r or -p options was given, default to
* a RAM load as that is the only option that makes sense.
--
1.6.4
#!/bin/bash
################################################################################
# Setup framework #
################################################################################
source env_pkg.sh
################################################################################
# Set configuration variables #
################################################################################
GMP_NAME=gmp
GMP_VERSION=5.0.4
GMP_EXTENSION=.tar.bz2
GMP_LOCATIONS=http://ftp.gnu.org/gnu/gmp
MPFR_NAME=mpfr
MPFR_VERSION=3.1.0
MPFR_EXTENSION=.tar.bz2
MPFR_LOCATIONS=http://www.mpfr.org/mpfr-current
MPC_NAME=mpc
MPC_VERSION=0.9
MPC_EXTENSION=.tar.gz
MPC_LOCATIONS=http://www.multiprecision.org/mpc/download
BINUTILS_NAME=binutils
BINUTILS_VERSION=2.22
BINUTILS_EXTENSION=.tar.bz2
BINUTILS_LOCATIONS=http://ftp.gnu.org/gnu/binutils
BINUTILS_CONFIGURE_OPTIONS=${BINUTILS_CONFIGURE_OPTIONS:-""}
ELF2FLT_NAME=elf2flt
ELF2FLT_VERSION=git
ELF2FLT_EXTENSION=.tar.bz2
ELF2FLT_LOCATIONS=git://sources.blackfin.uclinux.org/git/users/vapier/elf2flt.git
ELF2FLT_PATCHES=${ELF2FLT_PATCHES:-"arm"}
GCC_NAME=gcc
GCC_VERSION=${GCC_VERSION:-4.7.0}
GCC_EXTENSION=.tar.bz2
GCC_LOCATIONS=http://ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}
GCC_STAGE_1_CONFIGURE_OPTIONS=${GCC_STAGE_1_CONFIGURE_OPTIONS:-""}
GCC_CONFIGURE_OPTIONS=${GCC_CONFIGURE_OPTIONS:-""}
UCLIBC_NAME=uClibc
UCLIBC_VERSION=${UCLIBC_VERSION:-0.9.33.1}
UCLIBC_EXTENSION=.tar.xz
UCLIBC_LOCATIONS=http://www.uclibc.org/downloads
UCLIBC_CONFIG=${UCLIBC_CONFIG:-"def.config"}
LINUX_NAME=linux
LINUX_VERSION=${LINUX_VERSION:-3.2.14}
LINUX_EXTENSION=.tar.bz2
LINUX_LOCATIONS=http://www.kernel.org/pub/linux/kernel/v3.x
LINUX_PATCHES=${LINUX_PATCHES:-""}
LINUX_CONFIG=${LINUX_CONFIG:-"def.config"}
LINUXRT_VERSION=${LINUXRT_VERSION:-""}
LINUXRT_EXTENSION=.patch.bz2
LINUXRT_LOCATIONS=http://www.kernel.org//pub/linux/kernel/projects/rt/${LINUX_VERSION%.*}{,/older}
################################################################################
# binutils #
################################################################################
toolchain_build_binutils()
{
# download
pkg_source_get ${BINUTILS_NAME} ${BINUTILS_VERSION} ${BINUTILS_EXTENSION}
${BINUTILS_LOCATIONS}
# extract
pkg_source_extract ${BINUTILS_NAME} ${BINUTILS_VERSION}
${BINUTILS_EXTENSION}
# build
pkg_build_enter ${BINUTILS_NAME} ${BINUTILS_VERSION}
CFLAGS="${CFLAGS} ${HOST_CFLAGS}" \
${PKG_SOURCES}/binutils-${BINUTILS_VERSION}/configure \
--prefix=${PKG_TOOLCHAIN_PREFIX} \
--with-sysroot=${PKG_TOOLCHAIN_SYSROOT} \
--build=${BUILD} \
--host=${HOST} \
--target=${TARGET} \
${GCC_TARGET_CPU} \
--disable-nls \
--disable-multilib \
--enable-shared \
\
${BINUTILS_CONFIGURE_OPTIONS} \
\
-v
$MAKE configure-host
$MAKE
$MAKE install
pkg_build_leave ${BINUTILS_NAME} ${BINUTILS_VERSION}
}
################################################################################
# #
################################################################################
toolchain_build_elf2flt()
{
# download
pkg_source_get ${ELF2FLT_NAME} ${ELF2FLT_VERSION} ${ELF2FLT_EXTENSION}
${ELF2FLT_LOCATIONS}
# extract
pkg_source_extract ${ELF2FLT_NAME} ${ELF2FLT_VERSION} ${ELF2FLT_EXTENSION}
# patch
pkg_source_patch ${ELF2FLT_NAME} ${ELF2FLT_VERSION} ${ELF2FLT_PATCHES}
# build for host
pkg_build_enter ${ELF2FLT_NAME} ${ELF2FLT_VERSION}
local binutils_src_dir=${PKG_SOURCES}/binutils-${BINUTILS_VERSION}
local binutils_bld_dir=${PKG_BUILDS}/binutils-${BINUTILS_VERSION}
CFLAGS="${CFLAGS} ${HOST_CFLAGS}" \
${PKG_SOURCES}/elf2flt-${ELF2FLT_VERSION}/configure \
--prefix=${PKG_TOOLCHAIN_PREFIX} \
--build=${BUILD} \
--host=${HOST} \
--target=${TARGET} \
--with-binutils-include-dir=${binutils_src_dir}/include \
--with-bfd-include-dir=${binutils_bld_dir}/bfd \
--with-libbfd=${binutils_bld_dir}/bfd/libbfd.a \
--with-libiberty=${binutils_bld_dir}/libiberty/libiberty.a
$MAKE
$MAKE install
pkg_build_leave ${ELF2FLT_NAME} ${ELF2FLT_VERSION}
}
################################################################################
# gcc stage 1 (static without libc headers) #
################################################################################
toolchain_build_gcc_stage_1()
{
# download
pkg_source_get ${GMP_NAME} ${GMP_VERSION} ${GMP_EXTENSION} ${GMP_LOCATIONS}
pkg_source_get ${MPFR_NAME} ${MPFR_VERSION} ${MPFR_EXTENSION}
${MPFR_LOCATIONS}
pkg_source_get ${MPC_NAME} ${MPC_VERSION} ${MPC_EXTENSION} ${MPC_LOCATIONS}
#pkg_source_get ${GCC_NAME}-core ${GCC_VERSION} ${GCC_EXTENSION}
${GCC_LOCATIONS}
pkg_source_get ${GCC_NAME} ${GCC_VERSION} ${GCC_EXTENSION} ${GCC_LOCATIONS}
# extract
pkg_source_extract ${GMP_NAME} ${GMP_VERSION} ${GMP_EXTENSION}
pkg_source_extract ${MPFR_NAME} ${MPFR_VERSION} ${MPFR_EXTENSION}
pkg_source_extract ${MPC_NAME} ${MPC_VERSION} ${MPC_EXTENSION}
#pkg_source_extract ${GCC_NAME}-core ${GCC_VERSION} ${GCC_EXTENSION}
pkg_source_extract ${GCC_NAME} ${GCC_VERSION} ${GCC_EXTENSION}
# hack hack hack
if [ ! -L ${PKG_SOURCES}/gcc-${GCC_VERSION}/gmp ]
then
ln -s ${PKG_SOURCES}/gmp-${GMP_VERSION}
${PKG_SOURCES}/gcc-${GCC_VERSION}/gmp
fi
if [ ! -L ${PKG_SOURCES}/gcc-${GCC_VERSION}/mpfr ]
then
ln -s ${PKG_SOURCES}/mpfr-${MPFR_VERSION}
${PKG_SOURCES}/gcc-${GCC_VERSION}/mpfr
fi
if [ ! -L ${PKG_SOURCES}/gcc-${GCC_VERSION}/mpc ]
then
ln -s ${PKG_SOURCES}/mpc-${MPC_VERSION}
${PKG_SOURCES}/gcc-${GCC_VERSION}/mpc
fi
# build
pkg_build_enter ${GCC_NAME} ${GCC_VERSION}
ASFLAGS="${ASFLAGS} ${HOST_ASFLAGS}" \
CFLAGS="${CFLAGS} ${HOST_CFLAGS}" \
${PKG_SOURCES}/gcc-${GCC_VERSION}/configure \
--prefix=${PKG_TOOLCHAIN_PREFIX} \
--with-sysroot=${PKG_TOOLCHAIN_SYSROOT} \
--build=${BUILD} \
--host=${HOST} \
--target=${TARGET} \
${GCC_TARGET_CPU} \
${GCC_TARGET_TUNE} \
${GCC_TARGET_ARCH} \
${GCC_TARGET_FLOAT} \
${GCC_TARGET_ABI} \
\
--without-ppl \
--without-cloog \
--with-mpfr-include=${PKG_SOURCES}/gcc-${GCC_VERSION}/mpfr/src \
--with-mpfr-lib=${PKG_BUILDS}/gcc-${GCC_VERSION}/mpfr/src/.libs \
--disable-nls \
--enable-clocale=generic \
--enable-languages=c \
\
--disable-multilib \
--disable-decimal-float \
--disable-libquadmath \
--disable-libmudflap \
--disable-libssp \
--disable-libgomp \
\
--disable-shared \
--disable-threads \
\
--without-headers \
--with-newlib \
\
${GCC_STAGE_1_CONFIGURE_OPTIONS} \
\
-v
# --without-headers and --with-newlib make gcc believe that there
# is no c library available (yet)
$MAKE all-gcc \
ASFLAGS_FOR_TARGET="${ASFLAGS_FOR_TARGET} ${TARGET_ASFLAGS}" \
CFLAGS_FOR_TARGET="${CFLAGS_FOR_TARGET} ${TARGET_CFLAGS}"
$MAKE install-gcc
$MAKE all-target-libgcc \
ASFLAGS_FOR_TARGET="${ASFLAGS_FOR_TARGET} ${TARGET_ASFLAGS}" \
CFLAGS_FOR_TARGET="${CFLAGS_FOR_TARGET} ${TARGET_CFLAGS}"
$MAKE install-target-libgcc
PKG_BUILD_LEAVE_CLEAN="yes_follow_links" \
pkg_build_leave ${GCC_NAME} ${GCC_VERSION}
}
################################################################################
# kernel headers #
################################################################################
toolchain_build_kernel_headers()
{
# download
pkg_source_get ${LINUX_NAME} ${LINUX_VERSION} ${LINUX_EXTENSION}
${LINUX_LOCATIONS}
# extract
pkg_source_extract ${LINUX_NAME} ${LINUX_VERSION} ${LINUX_EXTENSION}
# patch
pkg_source_patch ${LINUX_NAME} ${LINUX_VERSION} "${LINUX_PATCHES}"
# build
PKG_BUILD_ENTER_SRC_DIR="yes" \
pkg_build_enter ${LINUX_NAME} ${LINUX_VERSION}
# patch for rt
if [ -n "${LINUXRT_VERSION}" ]
then
pkg_source_get patch ${LINUX_VERSION}${LINUXRT_VERSION}
${LINUXRT_EXTENSION} ${LINUXRT_LOCATIONS}
cat=cat
if [ ${LINUXRT_EXTENSION} = ".patch.bz2" ]
then
cat=bunzip2
elif [ ${LINUXRT_EXTENSION} = ".patch.gz" ]
then
cat=gunzip
fi
$cat <
${PKG_DOWNLOADS}/patch-${LINUX_VERSION}${LINUXRT_VERSION}${LINUXRT_EXTENSION} |
patch --dry-run -p1
if [ $? -eq 0 ]
then
$cat <
${PKG_DOWNLOADS}/patch-${LINUX_VERSION}${LINUXRT_VERSION}${LINUXRT_EXTENSION} |
patch -p1
fi
fi
# build headers
$MAKE headers_check \
ARCH=${LINUX_TARGET_ARCH} \
CROSS_COMPILE=${TARGET}-
$MAKE headers_install \
ARCH=${LINUX_TARGET_ARCH} \
CROSS_COMPILE=${TARGET}- \
INSTALL_HDR_PATH=${PKG_TOOLCHAIN_SYSROOT}/usr
#PKG_BUILD_LEAVE_CLEAN="yes" \
pkg_build_leave ${LINUX_NAME} ${LINUX_VERSION}
}
################################################################################
# libc #
################################################################################
toolchain_build_libc()
{
# download
pkg_source_get ${UCLIBC_NAME} ${UCLIBC_VERSION} ${UCLIBC_EXTENSION}
${UCLIBC_LOCATIONS}
# extract
pkg_source_extract ${UCLIBC_NAME} ${UCLIBC_VERSION} ${UCLIBC_EXTENSION}
# build
PKG_BUILD_ENTER_SRC_DIR="yes" \
pkg_build_enter ${UCLIBC_NAME} ${UCLIBC_VERSION}
# configure
if [ -f ${FWK_SYSTEM_PACKAGES}/uClibc/${UCLIBC_CONFIG} ]
then
cp ${FWK_SYSTEM_PACKAGES}/uClibc/${UCLIBC_CONFIG} ./.config
$MAKE ARCH=${LINUX_TARGET_ARCH} CROSS_COMPILE=${TARGET}- oldconfig
else
echo "${FWK_SYSTEM_PACKAGES}/uClibc/${UCLIBC_CONFIG} not found"
exit 1
fi
# uclibc don't take the good kernel header
# and fail with, e.g., '__ARM_NR_set_tls' undeclared
# we need to give the kernel path, see
#
http://www.linuxfromscratch.org/clfs/view/clfs-3.0/mips/cross-tools/uclibc.html
# buildroot-yyyy.mm/toolchain/uClibc/uclibc.mk
#
http://www.avrfreaks.net/wiki/index.php/Documentation:AVR32_Linux_Toolchain_HowTo#Building_the_C_library
#
# SHARED_LIB_LOADER_PREFIX has been replaced by MULTILIB_DIR in uclibc >=
0.9.33
#
sed -i.bak \
-e "/^CROSS_COMPILER_PREFIX/s:=.*:=\"${TARGET}-\":" \
-e "/^TARGET_ARCH/s:=.*:=\"${LINUX_TARGET_ARCH}\":" \
-e "/^KERNEL_HEADERS/s:=.*:=\"${PKG_TOOLCHAIN_SYSROOT}/usr/include\":" \
-e "/^DEVEL_PREFIX/s:=.*:=\"/usr\":" \
-e "/^RUNTIME_PREFIX/s:=.*:=\"/\":" \
-e "/^SHARED_LIB_LOADER_PREFIX/s:=.*:=\"/lib${LIBDIRSUFFIX}\":" \
-e "/^MULTILIB_DIR/s:=.*:=\"/lib${LIBDIRSUFFIX}\":" \
-e "/^UCLIBC_EXTRA_CFLAGS/s:=.*:=\"${TARGET_CFLAGS} -O2\":" \
.config
$MAKE all utils \
install install_utils \
ARCH=${LINUX_TARGET_ARCH} \
CROSS_COMPILE=${TARGET}- \
PREFIX=${PKG_TOOLCHAIN_SYSROOT}
# install host stuff
$MAKE hostutils \
install_hostutils \
ARCH=${LINUX_TARGET_ARCH} \
CROSS_COMPILE=${TARGET}- \
PREFIX=${PKG_TOOLCHAIN_PREFIX}
# ${PREFIX}${DEVEL_PREFIX}bin/ldd
if [ -f ${PKG_TOOLCHAIN_PREFIX}/usr/bin/ldd ]
then
ln -sf ../usr/bin/ldd ${PKG_TOOLCHAIN_PREFIX}/bin/${TARGET}-ldd
fi
# ${PREFIX}${RUNTIME_PREFIX}sbin/ldconfig
if [ -f ${PKG_TOOLCHAIN_PREFIX}/sbin/ldconfig ]
then
ln -sf ../sbin/ldconfig ${PKG_TOOLCHAIN_PREFIX}/bin/${TARGET}-ldconfig
fi
pkg_build_leave ${UCLIBC_NAME} ${UCLIBC_VERSION}
}
################################################################################
# gcc #
################################################################################
toolchain_build_gcc()
{
# download
pkg_source_get ${GMP_NAME} ${GMP_VERSION} ${GMP_EXTENSION} ${GMP_LOCATIONS}
pkg_source_get ${MPFR_NAME} ${MPFR_VERSION} ${MPFR_EXTENSION}
${MPFR_LOCATIONS}
pkg_source_get ${MPC_NAME} ${MPC_VERSION} ${MPC_EXTENSION} ${MPC_LOCATIONS}
#pkg_source_get ${GCC_NAME}-core ${GCC_VERSION} ${GCC_EXTENSION}
${GCC_LOCATIONS}
#pkg_source_get ${GCC_NAME}-g++ ${GCC_VERSION} ${GCC_EXTENSION}
${GCC_LOCATIONS}
pkg_source_get ${GCC_NAME} ${GCC_VERSION} ${GCC_EXTENSION} ${GCC_LOCATIONS}
# extract
pkg_source_extract ${GMP_NAME} ${GMP_VERSION} ${GMP_EXTENSION}
pkg_source_extract ${MPFR_NAME} ${MPFR_VERSION} ${MPFR_EXTENSION}
pkg_source_extract ${MPC_NAME} ${MPC_VERSION} ${MPC_EXTENSION}
#pkg_source_extract ${GCC_NAME}-core ${GCC_VERSION} ${GCC_EXTENSION}
#pkg_source_extract ${GCC_NAME}-g++ ${GCC_VERSION} ${GCC_EXTENSION}
pkg_source_extract ${GCC_NAME} ${GCC_VERSION} ${GCC_EXTENSION}
# hack hack hack
if [ ! -L ${PKG_SOURCES}/gcc-${GCC_VERSION}/gmp ]
then
ln -s ${PKG_SOURCES}/gmp-${GMP_VERSION}
${PKG_SOURCES}/gcc-${GCC_VERSION}/gmp
fi
if [ ! -L ${PKG_SOURCES}/gcc-${GCC_VERSION}/mpfr ]
then
ln -s ${PKG_SOURCES}/mpfr-${MPFR_VERSION}
${PKG_SOURCES}/gcc-${GCC_VERSION}/mpfr
fi
if [ ! -L ${PKG_SOURCES}/gcc-${GCC_VERSION}/mpc ]
then
ln -s ${PKG_SOURCES}/mpc-${MPC_VERSION}
${PKG_SOURCES}/gcc-${GCC_VERSION}/mpc
fi
# build
pkg_build_enter ${GCC_NAME} ${GCC_VERSION}
ASFLAGS="${ASFLAGS} ${HOST_ASFLAGS}" \
CFLAGS="${CFLAGS} ${HOST_CFLAGS}" \
${PKG_SOURCES}/gcc-${GCC_VERSION}/configure \
--prefix=${PKG_TOOLCHAIN_PREFIX} \
--with-sysroot=${PKG_TOOLCHAIN_SYSROOT} \
--build=${BUILD} \
--host=${HOST} \
--target=${TARGET} \
${GCC_TARGET_CPU} \
${GCC_TARGET_TUNE} \
${GCC_TARGET_ARCH} \
${GCC_TARGET_FLOAT} \
${GCC_TARGET_ABI} \
\
--without-ppl \
--without-cloog \
--with-mpfr-include=${PKG_SOURCES}/gcc-${GCC_VERSION}/mpfr/src \
--with-mpfr-lib=${PKG_BUILDS}/gcc-${GCC_VERSION}/mpfr/src/.libs \
--disable-nls \
--enable-clocale=generic \
--enable-languages=c,c++ \
\
--enable-shared \
--enable-threads=posix \
--enable-tls \
--disable-__cxa_atexit \
\
${GCC_CONFIGURE_OPTIONS} \
\
-v
# now with shared libs and threads
# now with c++
# the cxa_atexit is special for eglibc
$MAKE \
ASFLAGS_FOR_TARGET="${ASFLAGS_FOR_TARGET} ${TARGET_ASFLAGS}" \
CFLAGS_FOR_TARGET="${CFLAGS_FOR_TARGET} ${TARGET_CFLAGS}"
$MAKE install
pkg_build_leave ${GCC_NAME} ${GCC_VERSION}
}
################################################################################
# #
################################################################################
toolchain_build_binutils
toolchain_build_elf2flt
toolchain_build_gcc_stage_1
toolchain_build_kernel_headers
toolchain_build_libc
toolchain_build_gcc
_______________________________________________
linux-arm-kernel mailing list
linux-arm-ker...@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
Celinux-dev mailing list
Celinux-dev@lists.celinuxforum.org
https://lists.celinuxforum.org/mailman/listinfo/celinux-dev
