Hi List
I have ntp running as a service on a PC, with the expectation that it
would keep time in synch to my ntp server.
However, while I can manually update the time using "ntpdate -u ...",
I find that if I manually force the wrong time, the ntpd service does
not automatically re-synch the system time with the ntp server:
- Current time:
[admin@lol ~]# date
Wed Jan 27 10:54:21 AST 2016
- Force wrong time:
[admin@lol ~]# date -s 09:29
Wed Jan 27 09:29:00 AST 2016
- Restart ntp service:
[admin@lol ~]# service ntpd restart
Shutting down ntpd: [ OK ]
Starting ntpd: [ OK ]
- Time not synched (even after about 10 minutes)
[admin@lol ~]# date
Wed Jan 27 09:35:52 AST 2016
- use ntpdate -u to force synch:
[admin@lol ~]# ntpdate -u time.lol.com
27 Jan 11:02:28 ntpdate[18570]: step time server 172.16.100.13 offset
5154.859809 sec
[osadmin@test-till ~]#
[admin@lol ~]# date
Wed Jan 27 11:03:09 AST 2016
I'm not sure if this is a configuration issue with ntp (ntp.conf looks
fine, as well as /etc/sysconfig/ntpd.conf (pasted below).
/etc/ntp.conf:
restrict default nomodify notrap nopeer noquery
restrict 127.0.0.1
restrict ::1
server time.lol.com
driftfile /var/lib/ntp/drift
/etc/sysconfig/ntpd"
# Drop root to id 'ntp:ntp' by default.
OPTIONS="-x -u ntp:ntp -p /var/run/ntpd.pid"
# Set to 'yes' to sync hw clock after successful ntpdate
SYNC_HWCLOCK=yes
# Additional options for ntpdate
NTPDATE_OPTIONS=""
---
Here are some diagnostic queries with ntpq:
---
[admin@lol ~]# ntpq -pcrv
remote refid st t when poll reach delay offset jitter
==============================================================================
10.1.0.111 xxx.xx.xx.x 2 u 26 64 1 3.618 6018473 0.001
associd=0 status=c012 leap_alarm, sync_unspec, 1 event, freq_set,
version="ntpd [email protected] Sat Nov 23 18:20:11 UTC 2013 (1)",
processor="i686", system="Linux/2.6.32-504.1.3.el6.i686", leap=11,
stratum=16, precision=-20, rootdelay=0.000, rootdisp=0.405, refid=INIT,
reftime=00000000.00000000 Thu, Feb 7 2036 9:28:16.000,
clock=da52e461.90fabbc4 Wed, Jan 27 2016 9:38:25.566, peer=0, tc=3,
mintc=3, offset=0.000, frequency=356.208, sys_jitter=0.000,
clk_jitter=0.001, clk_wander=0.000
----
What could be the issue? Any help would be appreciated.
Here is the output from running the ntpd service in debug mode:
---
[admin@lol ~]# ntpd -d
ntpd [email protected] Sat Nov 23 18:20:11 UTC 2013 (1)
27 Jan 09:29:58 ntpd[18652]: proto: precision = 0.931 usec
27 Jan 09:29:58 ntpd[18652]: 0.0.0.0 c01d 0d kern kernel time sync enabled
event at 0 0.0.0.0 c01d 0d kern kernel time sync enabled
Finished Parsing!!
27 Jan 09:29:58 ntpd[18652]: ntp_io: estimated max descriptors: 1024,
initial socket boundary: 16
27 Jan 09:29:58 ntpd[18652]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
27 Jan 09:29:58 ntpd[18652]: Listen and drop on 1 v6wildcard :: UDP 123
27 Jan 09:29:58 ntpd[18652]: Listen normally on 2 lo 127.0.0.1 UDP 123
restrict: op 1 addr 127.0.0.1 mask 255.255.255.255 mflags 00003000
flags 00000001
27 Jan 09:29:58 ntpd[18652]: Listen normally on 3 eth 172.16.0.213 UDP 123
restrict: op 1 addr 172.16.0.213 mask 255.255.255.255 mflags 00003000
flags 00000001
27 Jan 09:29:58 ntpd[18652]: Listen normally on 4 lo ::1 UDP 123
restrict: op 1 addr ::1 mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
mflags 00003000 flags 00000001
27 Jan 09:29:58 ntpd[18652]: Listen normally on 5 eth
fe80::3640:b5ff:fe90:104e UDP 123
restrict: op 1 addr fe80::3640:b5ff:fe90:104e mask
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff mflags 00003000 flags 00000001
27 Jan 09:29:58 ntpd[18652]: peers refreshed
27 Jan 09:29:58 ntpd[18652]: Listening on routing socket on fd #22 for
interface updates
restrict: op 1 addr 0.0.0.0 mask 0.0.0.0 mflags 00000000 flags 000001d0
restrict: op 1 addr :: mask 0.0.0.0 mflags 00000000 flags 000001d0
restrict: op 1 addr 127.0.0.1 mask 255.255.255.255 mflags 00000000
flags 00000000
restrict: op 1 addr ::1 mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
mflags 00000000 flags 00000000
key_expire: at 0 associd 17148
peer_clear: at 0 next 1 associd 17148 refid INIT
event at 0 10.1.0.111 8011 81 mobilize assoc 17148
newpeer: 172.16.0.213->10.1.0.111 mode 3 vers 4 poll 6 10 flags 0x1
0x1 ttl 0 key 00000000
27 Jan 09:29:58 ntpd[18652]: 0.0.0.0 c016 06 restart
event at 0 0.0.0.0 c016 06 restart
27 Jan 09:29:58 ntpd[18652]: 0.0.0.0 c012 02 freq_set kernel 356.208 PPM
event at 0 0.0.0.0 c012 02 freq_set kernel 356.208 PPM
transmit: at 1 172.16.0.213->10.1.0.111 mode 3 len 48
auth_agekeys: at 1 keys 1 expired 0
receive: at 1 172.16.0.213<-10.1.0.111 mode 4 len 48
event at 1 10.1.0.111 8024 84 reachable
clock_filter: n 1 off 6018.651057 del 0.003849 dsp 7.945313 jit 0.000001
.
.
---
I'm tempted to stick an "ntpdate -u ..." in the crontab to force
time-synch, but I don't see why that's needed if ntpd service should
already be fulfilling that purpose.
Many thanks in advance,
Traiano
_______________________________________________
CentOS mailing list
[email protected]
https://lists.centos.org/mailman/listinfo/centos
