LSI/Avago’s web pages don’t have any downloads for the SAS2308, so I think I’m out of luck wrt MegaRAID.
Bounced the node, confirmed MPT Firmware 15.10.09.00-IT. HP Driver is v 15.10.04.00. Both are the latest from HP. Unsure why, but the module itself reports version 20.100.00.00: [root@r1k1 sys] # cat module/mpt2sas/version 20.100.00.00 On 2016-05-25, 3:20 PM, "[email protected] on behalf of [email protected]" <[email protected] on behalf of [email protected]> wrote: >John R Pierce wrote: >> On 5/25/2016 11:44 AM, Kelly Lesperance wrote: >>> The HBA is an HP H220. >> >> OH. its a very good idea to verify the driver is at the same revision >> level as the firmware. not 100% sure how you do this under CentOS, my >> H220 system is running FreeBSD, and is at revision P20, both firmware >> and driver. HP's firmware, at least what I could find, was a fairly >> old P14 or something, so I had to re-flash mine with 'generic' LSI >> firmware, this isn't exactly a recommended thing to do, but its sure >> working fine for me. > >Not sure if dmidecode will tell you, but you might see if you can run >smartctl -i > >Also, you could either, on boot, go into the card's firmware interface, >and that'll tell you, somewhere, what the firmware version is. Not sure if >MegaRAID will work with this card - if it does, you really want it..even >though it has an actively user-hostile interface. > > mark > >_______________________________________________ >CentOS mailing list >[email protected] >https://lists.centos.org/mailman/listinfo/centos _______________________________________________ CentOS mailing list [email protected] https://lists.centos.org/mailman/listinfo/centos
