On 7/26/2016 2:38 PM, Peter wrote:
On 27/07/16 09:11,m.r...@5-cent.us wrote:
>This is... odd. Got a 6.8 box, a Dell R320 lspci tells me
>01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008
>[Falcon] (rev 03)
>so it*should* accept an SAS drive. I've got a Cheetah that's a few years
>old, and having pulled it out of another server (in the datecenter), I put
>it in this box to zero it out for reuse... and the box refuses to see the
>drive.*Nothing* in dmesg,*nothing* in /var/log/messages, and I tried
>echo "0" etc to get the SCSI buses to rescan.
>
>Anyone have any ideas?
That's a hardware RAID controller, so it won't (by default) see single
drives and pass them directly to the OS like a normal disk controller
would. You need to go into the RAID config (you should see an option to
do this at boot) and configure a RAID with a single disk in a RAID0
configuration.
or use the MegaCli from linux to do the same, but the syntax is nasty
--
john r pierce, recycling bits in santa cruz
_______________________________________________
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
