On 11/29/19 6:55 AM, Jerry Geis wrote:
I am trying to specify a static IP on the new dracut format. I was using
this:
http://man7.org/linux/man-pages/man7/dracut.cmdline.7.html
So my grub entry consists
menuentry "Install CentOS 8" {
linux /boot/vmlinuz noverifyssl ks=https://something
ip=192.168.1.3::192.168.1.1:255.255.255.0::eth0:on:192.168.1.1
biosdevname=0 net.ifnames=0 ksdevice=eth0 inst.sshd sshd=1
initrd /boot/initrd.img
}
This seems OK to me. But rebooting to start the install for CentOS 8 it
just stops and says
"system halted". the lines above that have no errors.
.3 is the IP I want to use
.1 is the GW and the Nameserver in this case.
I'm guessing something with your kernel and/or initrd.img is incorrect.
If it was just the interface not getting configured properly you should
eventually get a bunch to dracut timeouts and then get dropped into the
emergency shell where you could poke around, not "system halted".
--
Orion Poplawski
Manager of NWRA Technical Systems 720-772-5637
NWRA, Boulder/CoRA Office FAX: 303-415-9702
3380 Mitchell Lane or...@nwra.com
Boulder, CO 80301 https://www.nwra.com/
_______________________________________________
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos