On 5/10/2011 10:17 AM, Maciej Jan Broniarz wrote:
>
> Wiadomość napisana przez Les Mikesell w dniu 2011-05-10, o godz. 17:07:
>
>> On 5/10/2011 9:53 AM, Maciej Jan Broniarz wrote:
>>> Hi all,
>>>
>>> Centos 5.6 doesn't detect any disks connected to an Adaptec 6405 RAID
>>> Controller. The hardware isn't brand new to the market, so what might be
>>> the issue here? It seems, that the driver is missing for that particular
>>> card.
>>>
>>
>> I don't know about that particular device, but I've seen RAID
>> controllers where you had to run their bios setup utility to add disks
>> and create volumes even if you only want a single disk per volume. The
>> OS only sees the volumes as logical drives. Or have you already done
>> that step?
>
> I have and array setup in the controlers BIOS. What i need to do is to
> install centos on the logical volume. Still, Centos 5.6 seems not to have any
> drivers for Adaptec 6405.
Maybe it needs a newer aacraid driver than what is included. Have you
tried the 1.1.7 driver disk that you can download from the adaptec site?
--
Les Mikesell
[email protected]
_______________________________________________
CentOS mailing list
[email protected]
http://lists.centos.org/mailman/listinfo/centos
