Hi Jerker,
Can you include './ceph -w' output during the startup procedure? That
will tell you what the system is (not) doing. You just need to make sure
./ceph -w starts up after the .ceph_monmap file has been generated.
sage
On Wed, 14 Jan 2009, Jerker Nyberg wrote:
>
> I am trying the unstable ceph branch again after a few months break. I noticed
> the depencies on "libedit" and that "cmonmap" has been renamed so I added that
> information to the weiki. But I still cannot get Ceph to start again. Any
> ideas? I run Scientific Linux 5.X on the nodes, a RHEL5-clone, with kernel
> 2.6.26.3 like before.
>
> # mount -t ceph 10.0.0.10:/ /ceph/
> mount: 10.0.0.10:/: can't read superblock
> # ./csyn --syn makedirs 1 1 1 --syn walk
> [opened monmap at .ceph_monmap fsid 188c8262-8bb1-b055-4b16-95bb075cce60]
> starting csyn at 0.0.0.0:6801/30967/0
> mounting and starting 1 syn client(s)
> waiting for client(s) to finish
> [...waiting forever...]
> ^C
> # telnet 10.0.0.10 12345
> Trying 10.0.0.10...
> Connected to 10.0.0.10
> Escape character is '^]'.
> ceph 012
> 09îò
>
> ^]
> telnet> quit
> Connection closed.
> # telnet xp2 6800
> Trying 10.0.0.10...
> Connected to 10.0.0.10
> Escape character is '^]'.
> ceph 012
> wîò^]
> telnet> quit
> Connection closed.
> #
>
> I use the following script to launch Ceph.
>
> http://www.update.uu.se/~jerker/ceph/start.ceph.2_disks.sh.txt
>
> --jerker
>
>
>
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Ceph-devel mailing list
Ceph-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ceph-devel
