On Thu, 2011-06-02 at 17:33 +0530, Lalit Bhasin wrote:
> On Thu, 2011-06-02 at 15:55 +0000, Jeff Wu wrote:
> > Hi ,
> >
> > Could you create the folder
> > node0: /data/osd0/osd0 /data/osd0/osd1
> > node1: /data/osd1/osd0 /data/osd1/osd1
> >
> > or
> > try to modify " osd data = /data" at your ceph.conf,
> > then create /data/osd0 and /data/osd1 at your node0&&node1.
> >
> > I had filed the issue at :
> >
> > http://tracker.newdream.net/issues/1015
> >
> >
> > but Greg Farnum added the Comment :"
> >
> > You need to create the directory yourself and this is deliberate. It
> > prevents administrators from not fully setting up their cluster and
> > accidentally having the OSD use the root partition when they meant to
> > use a separate drive mounted at /osd."
> >
> > Jeff ,Wu
> >
> Thanks Jeff. This helped. I now used single ceph.conf file on both the
> nodes, and used $i substitution for osd and mon, and it worked ( so
> kept /data/osd1 and /data/osd0 in node1 and node0 respectively).
>
>
> Subsequently file system creation worked fine, and all ceph daemons
> started fine. But mount gives error as below:
> --
> lalitb@node0:/data/osd0$ sudo mount -t ceph 192.168.230.12:/ /ceph
> [sudo] password for lalitb:
> mount error 5 = Input/output error
> lalitb@node0:/data/osd0$
> ---
>
> Where 192.168.230.12 is IP address of node0. Cannot see any error in
> syslog.
>
> - Lalit
>
Ok, I modified ceph.conf file to create osd journal on writehead mode,
and mount was successful after this. It seems this is requirement for
non-brtfs.
- Lalit
> >
> >
> >
> >
> > On Thu, 2011-06-02 at 15:41 +0800, Lalit Bhasin wrote:
> > > On Thu, 2011-06-02 at 15:14 +0000, Jeff Wu wrote:
> > > > Hi ,
> > > > try the steps:
> > > > 1. use root user;
> > > > 2. manually create /data/osd${N} folder.
> > > Jeff, I ensured that /data/osd0 ( on node0) and /data/osd1 ( on node1)
> > > existed before shooting this command on node1. Got same error using root
> > > user also ( ofcourse this time there was no permission denied error
> > > while writing to error logs).
> > > mkcephfs is failing while trying to execute below command on node0:
> > >
> > > ssh node0 /sbin/mkcephfs -d /tmp/mkcephfs.e3FNLexFkx --init-daemon osd.0
> > >
> > > And it is reporting error as:
> > >
> > > ** ERROR: error creating empty object store in /data/osd1: error 2: No
> > > such file or directory
> > >
> > > Which is somewhat true since /data/osd1 only exists in node1, and not
> > > node0. Does it means there are some error in ceph.conf.
> > >
> > > - Lalit
> > >
> > >
> > >
> > > >
> > > > Jeff ,Wu
> > > >
> > > > On Thu, 2011-06-02 at 14:59 +0800, Lalit Bhasin wrote:
> > > > > Guys, I am new to ceph. Trying to create a 2 node cluster setup of
> > > > > ceph.
> > > > > Getting errors during mk file system : http://dpaste.com/hold/549518/.
> > > > > Any idea what's going wrong?
> > > > >
> > > > >
> > > > > - Lalit
> > > > >
> > > > > --
> > > > > To unsubscribe from this list: send the line "unsubscribe ceph-devel"
> > > > > in
> > > > > the body of a message to [email protected]
> > > > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > >
> > >
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
> > > the body of a message to [email protected]
> > > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
