On Mon, 22 Apr 2013, Loic Dachary wrote:
> Hi Sage,
>
> On 04/22/2013 05:09 PM, Sage Weil wrote:
> > On Mon, 22 Apr 2013, Christopher LILJENSTOLPE wrote:
> >> Supposedly, on 2013-Apr-22, at 01.10 PDT(-0700), someone claiming to be
> >> Loic Dachary scribed:
> >>
> >>> Hi Christopher,
> >>>
> >>> You wrote "A modified client/library could be used to store objects that
> >>> should be sharded, vs "standard" ceph treatment. In this model, each
> >>> shard would be written to a seperate PG, and each PG would we stored on
> >>> exactly one OSD. " but there is no way for a client to enforce the fact
> >>> that two objects are stored in separate PG.
> >>
> >> Poorly worded. The idea is that each shard becomes a seperate object, and
> >> the encoder/sharder would use CRUSH to identify the OSDs to hold the
> >> shards. However, the OSDs would treat the shard as an n=1 replication and
> >> just store locally.
> >>
> >> Actually, looking at this this morning, this is actually harder than the
> >> prefered alternative (i.e. grafting a encode/decode into the (e)OSD. It
> >> was meant to cover the alternative approaches. I didn't like this one,
> >> but it now appears to be more difficult, and non-deterministic of the
> >> placement.
> >>
> >> One question on CRUSH (it's been too long since I read the paper), if x is
> >> the same for two objects, and, using an n=3 returns R={OSD18,OSD45,OSD97},
> >> if an object is handed to OSD45 that matches x, but has an n=1, would
> >> OSD45 store it, or would it forward it to OSD18 to store? If it would
> >> this idea is DOA. Also, if x is held invariant, but n changes, does the
> >> same R set get returned (truncated to n members)?
> >
> > It would go to osd18, the first item in the sequence that CRUSH generates.
> >
> > As Loic observes, not having control of placement from above the librados
> > level makes this more or less a non-started. The only thing that might
> > work at that layer is to set up ~5 or more pools, each with a distinct set
> > of OSDs, and put each shard/fragment in a different pool. I don't think
> > that is a particularly good approach.
> >
> > If we are going to do parity encoding (and I think we should!), I think we
> > should fully integrate it into the OSD.
> >
> > The simplest approach:
> >
> > - we create a new PG type for 'parity' or 'erasure' or whatever (type
> > fields already exist)
> > - those PGs use the parity ('INDEP') crush mode so that placement is
> > intelligent
>
> I assume you do not mean CEPH_FEATURE_INDEP_PG_MAP as used in
>
> https://github.com/ceph/ceph/blob/master/src/osd/OSD.cc#L5237
>
> but CRUSH_RULE_CHOOSE_INDEP as used in
>
> https://github.com/ceph/ceph/blob/master/src/crush/mapper.c#L331
>
> when firstn == 0 because it was set in
>
> https://github.com/ceph/ceph/blob/master/src/crush/mapper.c#L523
Right.
> I see that it would be simpler to write
>
> step choose indep 0 type row
>
> and then rely on intelligent placement. Is there a reason why it would not be
> possible to use firstn instead of indep ?
The indep placement avoids moving around a shard between ranks, because a
mapping of [0,1,2,3,4] will change to [0,6,2,3,4] (or something) if osd.1
fails and the shards on 2,3,4 won't need to be copied around.
> > - all reads and writes go to the 'primary'
> > - the primary does the shard encoding and distributes the write pieces to
> > the other replicas
>
> Although I understand how that would work when a PG receives a
> CEPH_OSD_OP_WRITEFULL
>
> https://github.com/ceph/ceph/blob/master/src/osd/ReplicatedPG.cc#L2504
>
> It may be inconvenient and expensive to recompute the parity encoded version
> if an object is written with a series of CEPH_OSD_OP_WRITE. The simplest way
> would be to decode the existing object, modify it according to what
> CEPH_OSD_OP_WRITE requires, encode it.
Yeah. Making small writes remotely efficient is a huge challenge.
OTOH, if we have some sort of symlink/redirect, and we do writes to
replicated objects and only write erasure/parity data in full objects,
then we avoid that complexity.
>
> > - same for reads
> >
> > There will be a pile of patches to move code around between PG and
> > ReplicatedPG, which will be annoying, but hopefully not too painful. The
> > class structure and data types were set up with this in mind long ago.
> >
> > Several key challenges:
> >
> > - come up with a scheme for internal naming to keep shards distinct
> > - safely rewriting a stripe when there is a partial overwrite. probably
> > want to write new stripes to distinct new objects (cloning old data as
> > needed) and clean up the old ones once enough copies are present.
>
> Do you mean RBD stripes ?
I'm thinking stipes of a logical object across the object's shards.
Mostly in terms of something like RAID4; I'm not sure what terminology is
typically used for erasure coding systems. I'm assuming that stripes of
the object would be coded to so that partial object reads/updates of
large objects are vaguely efficient...
Ideally, the implementation would have a field indicating what coding
technique is used (parity, erasure, whatever). Different optimizations
are best for different coding strategies, but the minimum useful feature
in this case wouldn't optimize anything anyway :)
> > - recovery logic
>
> If recovery is done from the scheduled scrubber in the ErasureCodedPG , I'm
> not sure if OSD.cc must be modified or is truly independent of the PG type
>
> https://github.com/ceph/ceph/blob/master/src/osd/OSD.cc#L3818
>
> I'll keep looking, thanks a lot for the hints :-)
>
> Cheers
>
> > sage
> >
> >
> >>
> >> Thx
> >> Christopher
> >>
> >>
> >>
> >>>
> >>> Am I missing something ?
> >>>
> >>> On 04/22/2013 09:23 AM, Christopher LILJENSTOLPE wrote:
> >>>> Supposedly, on 2013-Apr-18, at 14.31 PDT(-0700), someone claiming to be
> >>>> Plaetinck, Dieter scribed:
> >>>>
> >>>>> On Thu, 18 Apr 2013 16:09:52 -0500
> >>>>> Mark Nelson <[email protected]> wrote:
> >>>>
> >>>>>>
> >>>>>
> >>>>> @Bryan: I did come across cleversafe. all the articles around it
> >>>>> seemed promising,
> >>>>> but unfortunately it seems everything related to the cleversafe open
> >>>>> source project
> >>>>> somehow vanished from the internet. (e.g. http://www.cleversafe.org/)
> >>>>> quite weird...
> >>>>>
> >>>>> @Sage: interesting. I thought it would be more relatively simple if one
> >>>>> assumes
> >>>>> the restriction of immutable files. I'm not familiar with those ceph
> >>>>> specifics you're mentioning.
> >>>>> When building an erasure codes-based system, maybe there's ways to
> >>>>> reuse existing ceph
> >>>>> code and/or allow some integration with replication based objects,
> >>>>> without aiming for full integration or
> >>>>> full support of the rados api, based on some tradeoffs.
> >>>>>
> >>>>> @Josh, that sounds like an interesting approach. Too bad that page
> >>>>> doesn't contain any information yet :)
> >>>>
> >>>> Greetings - it does now - see what you all think?
> >>>>
> >>>> Christopher
> >>>>
> >>>>>
> >>>>> Dieter
> >>>>
> >>>>
> >>>> --
> >>>> ???
> >>>> Check my PGP key here: https://www.asgaard.org/~cdl/cdl.asc
> >>>> Current vCard here: https://www.asgaard.org/~cdl/cdl.vcf
> >>>> Check my calendar availability: https://tungle.me/cdl
> >>>
> >>> --
> >>> Lo?c Dachary, Artisan Logiciel Libre
> >>
> >>
> >> --
> >> ???
> >> Check my PGP key here: https://www.asgaard.org/~cdl/cdl.asc
> >> Current vCard here: https://www.asgaard.org/~cdl/cdl.vcf
> >> Check my calendar availability: https://tungle.me/cdl
> > --
> > To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> Lo?c Dachary, Artisan Logiciel Libre
>
>
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
