Hmm, the only changes I see between those two versions are some pretty precise cleanups which shouldn't cause this. But it means that a bisect or determined look should be easy. Can you create a ticket which includes the exact output you're seeing and the exact versions you're running? -Greg
On Mon, Jun 29, 2015 at 11:27 PM, Deneau, Tom <tom.den...@amd.com> wrote: > Oh, I just noticed that the client nodes I spoke of where load-gen actually > worked were > running 0.94, not 9.0.1. And when I upgrade them to 9.0.1, load-gen no > longer works. > > So more likely this is just a problem with newer rados load-gens > > -- Tom > > > >> -----Original Message----- >> From: Deneau, Tom >> Sent: Friday, June 26, 2015 7:48 PM >> To: ceph-devel >> Subject: load-gen from an osd node >> >> I am running 9.0.1 and I noticed when I run rados load-gen from one of the >> osd nodes, it creates the objects but then always reports a throughput of 0 >> MB/sec. >> >> But if I run it from a separate client node, it works fine. >> Why would this be? >> >> I'm not sure but I thought in earlier versions load-gen could be run from an >> osd node. >> >> -- Tom Deneau > -- > To unsubscribe from this list: send the line "unsubscribe ceph-devel" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
