The "random" may come from ceph trunks. For RBD, Ceph trunk the image to
4M(default) objects, for Rados bench , it already 4M objects if you didn't set
the parameters. So from XFS's view, there are lots of 4M files, in default,
with ag!=1 (allocation group, specified during mkfs, default seems to be 32 or
more), the files will be spread across the allocation groups, which results
some random pattern as you can see from blktrace.
AG=1 may works for single client senarios, but should not be that useful for a
multi-tenant environment since the access pattern is a mixture of all tenant,
shoud be random enough. One thing you may try is set the
/sys/block/{disk}/queue/readahead_kb= 1024 or 2048, that should be helpful for
sequential read performance.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Gregory Farnum
Sent: Tuesday, August 27, 2013 5:25 AM
To: Samuel Just
Cc: [email protected]; daniel pol
Subject: Re: [ceph-users] Sequential placement
In addition to that, Ceph uses full data journaling - if you have two journals
on the OS drive then you'll be limited to what that OS drive can provide,
divided by two (if you have two-copy happening).
-Greg
Software Engineer #42 @ http://inktank.com | http://ceph.com
On Mon, Aug 26, 2013 at 2:09 PM, Samuel Just <[email protected]> wrote:
> I think rados bench is actually creating new objects with each IO.
> Can you paste in the command you used?
> -Sam
>
> On Tue, Aug 20, 2013 at 7:28 AM, daniel pol <[email protected]> wrote:
>> Hi !
>>
>> Ceph newbie here with a placement question. I'm trying to get a
>> simple Ceph setup to run well with sequential reads big packets (>256k).
>> This is for learning/benchmarking purpose only and the setup I'm
>> working with has a single server with 2 data drives, one OSD on each,
>> journals on the OS drive, no replication, dumpling release.
>> When running rados bench or using a rbd block device the performance
>> is only 35%-50% of what the underlying XFS filesystem can do and when
>> I look at the IO trace I see random IO going to the physical disk,
>> while the IO at ceph layer is sequential. Haven't tested CephFS yet
>> but expect similar results there.
>> Looking for advice on how to configure Ceph to generate sequential
>> read IO pattern to the underlying physical disk.
>>
>> Have a nice day,
>> Dani
>>
>> _______________________________________________
>> ceph-users mailing list
>> [email protected]
>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>
> _______________________________________________
> ceph-users mailing list
> [email protected]
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
