Hello, I came across a section of the documentation that I don't quite understand. In the section about inconsistent PGs it says if one of the shards listed in `rados list-inconsistent-obj` has a read_error the disk is probably bad.
Quote from documentation: https://docs.ceph.com/docs/master/rados/troubleshooting/troubleshooting-pg/#pgs-inconsistent `If read_error is listed in the errors attribute of a shard, the inconsistency is likely due to disk errors. You might want to check your disk used by that OSD.` I determined that the disk is bad by looking at the output of smartctl. I would think that replacing the disk by removing the OSD from the cluster and allowing the cluster to recover would fix this inconsistency error without having to run `ceph pg repair`. Can I just replace the OSD and the inconsistency will be resolved by the recovery? Or would it be better to run `ceph pg repair` and then replace the OSD associated with that bad disk? Thanks! _______________________________________________ ceph-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
