Hi all,
I recently had a strange blip in the ceph logs:
2021-09-09 04:19:09.612111 [INF] Health check cleared: POOL_NEAR_FULL (was: 1
pools nearfull)
2021-09-09 04:13:18.187602 [INF] Health check cleared: POOL_FULL (was: 1 pools
full)
2021-09-09 04:13:18.187566 [WRN] Health check failed: 1 pools nearfull
(POOL_NEAR_FULL)
2021-09-09 04:12:09.078878 [INF] Health check cleared: POOL_NEAR_FULL (was: 1
pools nearfull)
2021-09-09 04:12:09.078850 [ERR] Health check failed: 1 pools full (POOL_FULL)
2021-09-09 04:08:16.898112 [WRN] Health check failed: 1 pools nearfull
(POOL_NEAR_FULL)
None of our pools are anywhere near full or close to their quotas:
# ceph df detail
GLOBAL:
SIZE AVAIL RAW USED %RAW USED OBJECTS
11 PiB 9.6 PiB 1.8 PiB 16.11 845.1 M
POOLS:
NAME ID QUOTA OBJECTS QUOTA BYTES USED
%USED MAX AVAIL OBJECTS DIRTY READ WRITE RAW
USED
sr-rbd-meta-one 1 N/A 500 GiB 90 GiB
0.21 41 TiB 31558 31.56 k 799 MiB 338 MiB
270 GiB
sr-rbd-data-one 2 N/A 70 TiB 36 TiB
27.96 93 TiB 13966792 13.97 M 4.2 GiB 2.5 GiB
48 TiB
sr-rbd-one-stretch 3 N/A 1 TiB 222 GiB
0.52 41 TiB 68813 68.81 k 863 MiB 860 MiB
667 GiB
con-rbd-meta-hpc-one 7 N/A 10 GiB 51 KiB
0 1.7 TiB 61 61 7.0 MiB 3.8 MiB
154 KiB
con-rbd-data-hpc-one 8 N/A 5 TiB 35 GiB
0 5.9 PiB 9245 9.24 k 144 MiB 78 MiB
44 GiB
sr-rbd-data-one-hdd 11 N/A 200 TiB 118 TiB
39.90 177 TiB 31460630 31.46 M 14 GiB 2.2 GiB
157 TiB
con-fs2-meta1 12 N/A 250 GiB 2.0 GiB
0.15 1.3 TiB 18045470 18.05 M 20 MiB 108 MiB
7.9 GiB
con-fs2-meta2 13 N/A 100 GiB 0 B
0 1.3 TiB 216425275 216.4 M 141 KiB 7.9 MiB
0 B
con-fs2-data 14 N/A 2.0 PiB 1.3 PiB
18.41 5.9 PiB 541502957 541.5 M 4.9 GiB 5.0 GiB
1.7 PiB
con-fs2-data-ec-ssd 17 N/A 1 TiB 239 GiB
5.29 4.2 TiB 3225690 3.23 M 17 MiB 0 B
299 GiB
ms-rbd-one 18 N/A 1 TiB 262 GiB
0.62 41 TiB 73711 73.71 k 4.8 MiB 1.5 GiB
786 GiB
con-fs2-data2 19 N/A 5 PiB 29 TiB
0.52 5.4 PiB 20322725 20.32 M 83 MiB 97 MiB
39 TiB
I'm not sure if IO stopped, it does not look like it. The blip might have been
artificial. I could not find any information about which pool(s) was causing
this.
We are running ceph version 13.2.10 (564bdc4ae87418a232fc901524470e1a0f76d641)
mimic (stable).
Any ideas what is going on or if this could be a problem?
Thanks and best regards,
=================
Frank Schilder
AIT Risø Campus
Bygning 109, rum S14
_______________________________________________
ceph-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
