From: osd_scrub_load_threshold The normalized maximum load. Ceph will not scrub when the system load (as defined by getloadavg() / number of online CPUs) is higher than this number. Default is 0.5.
Does anyone know how I can run getloadavg() / number of online CPUs so I can see what our load is? Is that a ceph command, or an OS command? Thank you, Ray -----Original Message----- From: Ray Cunningham Sent: Thursday, March 10, 2022 7:59 AM To: norman.kern <[email protected]> Cc: [email protected] Subject: RE: [ceph-users] Scrubbing We have 16 Storage Servers each with 16TB HDDs and 2TB SSDs for DB/WAL, so we are using bluestore. The system is running Nautilus 14.2.19 at the moment, with an upgrade scheduled this month. I can't give you a complete ceph config dump as this is an offline customer system, but I can get answers for specific questions. Off the top of my head, we have set: osd_max_scrubs 20 osd_scrub_auto_repair true osd _scrub_load_threashold 0.6 We do not limit srub hours. Thank you, Ray -----Original Message----- From: norman.kern <[email protected]> Sent: Wednesday, March 9, 2022 7:28 PM To: Ray Cunningham <[email protected]> Cc: [email protected] Subject: Re: [ceph-users] Scrubbing Ray, Can you provide more information about your cluster(hardware and software configs)? On 3/10/22 7:40 AM, Ray Cunningham wrote: > make any difference. Do _______________________________________________ ceph-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
