Hi, I used te procedure below te remove my osd's (te be able te recreate them).
I just want to add that I had to call 'cephadm rm-daemon --name osd.$id --fsid $fsid --force' to remove the osd service. If I didn't do that, I got a warning on the recreation of de osd (already exists?) and the recreated osd was a orphant... Greetings, Dominique. ________________________________________ Van: Eugen Block <[email protected]> Verzonden: donderdag 7 april 2022 8:15 Aan: Josh Baergen CC: [email protected] Onderwerp: [ceph-users] Re: Ceph PGs stuck inactive after rebuild node Basically, these are the steps to remove all OSDs from that host (OSDs are not "replaced" so they aren't marked "destroyed") [1]: 1) Call 'ceph osd out $id' 2) Call systemctl stop ceph-osd@$id 3) ceph osd purge $id --yes-i-really-mean-it 4) call ceph-volume lvm zap --osd-id $id --destroy After all disks have been wiped there's a salt runner to deploy all available OSDs on that host again[2]. All OSDs are created with a normal weight. All OSD restarts I did were on different hosts, not on the rebuilt host. The only difference I can think of that may have an impact is that this cluster consists of two datacenters, the others were not devided into several buckets. Could that be an issue? [1] https://github.com/SUSE/DeepSea/blob/master/srv/modules/runners/osd.py#L179 [2] https://github.com/SUSE/DeepSea/blob/master/srv/salt/_modules/dg.py#L1396 Zitat von Josh Baergen <[email protected]>: > On Wed, Apr 6, 2022 at 11:20 AM Eugen Block <[email protected]> wrote: >> I'm pretty sure that their cluster isn't anywhere near the limit for >> mon_max_pg_per_osd, they currently have around 100 PGs per OSD and the >> configs have not been touched, it's pretty basic. > > How is the host being "rebuilt"? Depending on the CRUSH rule, if the > host's OSDs are all marked destroyed and then re-created one at a time > with normal weight, CRUSH may decide to put a large number of PGs on > the first OSD that is created, and so on, until the rest of the host's > OSDs are available to take those OSDs. > > Josh _______________________________________________ ceph-users mailing list -- [email protected] To unsubscribe send an email to [email protected] _______________________________________________ ceph-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
