Correct, Dan, indeed at some point I had also raised the "hard-ratio" to
3, with no succes as I guess I was missing the "repeer"... I assumed
that restarting OSDs would 'do the whole work'.
Ok, I learned something today, thanks!
Fulvio
On 15/09/2022 21:28, Dan van der Ster wrote:
Another common config to workaround this pg num limit is:
ceph config set osd osd_max_pg_per_osd_hard_ratio 10
(Then possibly the repeer step on each activating pg)
.. Dan
On Thu, Sept 15, 2022, 17:47 Josh Baergen <jbaer...@digitalocean.com
<mailto:jbaer...@digitalocean.com>> wrote:
Hi Fulvio,
I've seen this in the past when a CRUSH change temporarily resulted in
too many PGs being mapped to an OSD, exceeding mon_max_pg_per_osd. You
can try increasing that setting to see if it helps, then setting it
back to default once backfill completes. You may also need to "ceph pg
repeer $pgid" for each of the PGs stuck activating.
Josh
On Thu, Sep 15, 2022 at 8:42 AM Fulvio Galeazzi
<fulvio.galea...@garr.it <mailto:fulvio.galea...@garr.it>> wrote:
>
>
> Hallo,
> I am on Nautilus and today, after upgrading the operating
system (from
> CentOS 7 to CentOS 8 Stream) on a couple OSD servers and adding them
> back to the cluster, I noticed some PGs are still "activating".
> The upgraded server are from the same "rack", and I have
replica-3
> pools with 1-per-rack rule, and 6+4 EC pools (in some cases, with SSD
> pool for metadata).
>
> More details:
> - on the two OSD servers I upgrade, I ran "systemctl stop
ceph.target"
> and waited a while, to verify all PGs would remain "active"
> - went on with the upgrade and ceph-ansible reconfig
> - as soon as I started adding OSDs I saw "slow ops"
> - to exclude possible effect of updated packages, I ran "yum
update" on
> all OSD servers, and rebooted them one by one
> - after 2-3 hours, the last OSD disks finally came up
> - I am left with:
> about 1k "slow ops" (if I pause recovery, number ~stable
but max
> age increasing)
> ~200 inactive PGs
>
> Most of the inactive PGs are from the object store pool:
>
> [cephmgr@cephAdmCT1.cephAdmCT1 ~]$ ceph osd pool get
> default.rgw.buckets.data crush_rule
> crush_rule: default.rgw.buckets.data
>
> rule default.rgw.buckets.data {
> id 6
> type erasure
> min_size 3
> max_size 10
> step set_chooseleaf_tries 5
> step set_choose_tries 100
> step take default class big
> step chooseleaf indep 0 type host
> step emit
> }
>
> But "ceph pg dump_stuck inactive" also shows 4 lines for the
glance
> replicated pool, like:
>
> 82.34 activating+remapped [139,50,207] 139
> [139,50,284] 139
> 82.54 activating+undersized+degraded+remapped [139,86,5] 139
> [139,74] 139
>
>
> Need your help please:
>
> - any idea what was the root cause for all this?
>
> - and now, how can I help OSDs complete their activation?
> + does the procedure differ for EC or replicated pools, by
the way?
> + or may be I should first get rid of the "slow ops" issue?
>
> I am pasting:
> ceph osd df tree
> https://pastebin.ubuntu.com/p/VWhT7FWf6m/
<https://pastebin.ubuntu.com/p/VWhT7FWf6m/>
>
> ceph osd lspools ; ceph pg dump_stuck inactive
> https://pastebin.ubuntu.com/p/9f6rXRYMh4/
<https://pastebin.ubuntu.com/p/9f6rXRYMh4/>
>
> Thanks a lot!
>
> Fulvio
>
> --
> Fulvio Galeazzi
> GARR-CSD Department
> tel.: +39-334-6533-250
> skype: fgaleazzi70
> _______________________________________________
> ceph-users mailing list -- ceph-users@ceph.io
<mailto:ceph-users@ceph.io>
> To unsubscribe send an email to ceph-users-le...@ceph.io
<mailto:ceph-users-le...@ceph.io>
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
<mailto:ceph-users@ceph.io>
To unsubscribe send an email to ceph-users-le...@ceph.io
<mailto:ceph-users-le...@ceph.io>
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
