Hi Jens,
On 26.01.23 16:17, Jens Galsgaard wrote:
After removing the dead monitors with the monmaptool the mon container has
vanished from podman.
So this somehow made things worse.
You have not mentioned that you are running Ceph in containers.
The procedure to repair the MON map may look a little bit different
then. The documentation only shows the non-containerized procedure.
Do you still have the systemd unit for the last working MON?
Run "systemctl --all | grep mon" to look for it. If it is stop try to
start it. Does the MON run?
Is it possible to create and add new monitors? Re-bootstrap the cluster in
lack of better terms?
It should be possible to restore the MON db using an exisiting OSD:
https://docs.ceph.com/en/pacific/rados/troubleshooting/troubleshooting-mon/#recovery-using-osds
This procedure would also have to be adapted for a containerized setup.
Regards
--
Robert Sander
Heinlein Consulting GmbH
Schwedter Str. 8/9b, 10119 Berlin
https://www.heinlein-support.de
Tel: 030 / 405051-43
Fax: 030 / 405051-19
Amtsgericht Berlin-Charlottenburg - HRB 220009 B
Geschäftsführer: Peer Heinlein - Sitz: Berlin
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
