Hi,
I've set up (latest bobtail) ceph between 2 Machines, 2 OSDs each.
Then I've started up a VM backed by LVM with windows something in it,
and i ran the crappy ATTO Disk Benchmark to get performance information
(my customer wants me to do it like that, sorry).
So with 4MB Blocks being written and read, this tool claims that this
certain setup writes with 6.5 MB/s and reads with 182MB/s.
Done the same with ceph, same virtual machine, same everything (no other
stuff is running in this testing environment), except for this in libvirt:
<disk type='network' device='disk'>
<driver name='qemu' type='raw'/>
<source protocol='rbd' name='rd/korfu:rbd_cache=1'>
<host name='rd-clusternode21' port='6789'/>
<host name='rd-clusternode22' port='6789'/>
</source>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' unit='0'/>
</disk>
Write-Speed is way better than LVM (probably because of caching):
111MB/s. But Read-Speed is really bad: 37MB/s (vs. 182MB/s with lvm).
The virtual Machine can somehow no longer maintain time, it drifts by
various minutes.
Ceph setup is pretty basic. Can anybody give me some hints where I could
turn some knobs? I'd rather trade some write-speed to get better
read-speed.
Wolfgang
--
DI (FH) Wolfgang Hennerbichler
Software Development
Unit Advanced Computing Technologies
RISC Software GmbH
A company of the Johannes Kepler University Linz
IT-Center
Softwarepark 35
4232 Hagenberg
Austria
Phone: +43 7236 3343 245
Fax: +43 7236 3343 250
[email protected]
http://www.risc-software.at
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
