The settings are under the the rgw client settings
[client.radosgw.internal.01]
rgw root zone pool = .rgw.zone2
rgw cluster root pool = .rgw.zone2
I tried 'radosgw-admin zone set --rgw-root-zone-pool=.rgw.zone2 < zone2'
and 'radosgw-admin zone info --rgw-root-zone-pool=.rgw.zone2'
Neither is reading from .rgw.zone2. How do you get radosgw-admin to run as a
different user?
Nelson Jeppesen
Disney Technology Solutions and Services
Phone 206-588-5001
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Yehuda Sadeh
Sent: Tuesday, May 07, 2013 2:46 PM
To: Jeppesen, Nelson
Cc: [email protected]
Subject: Re: [ceph-users] Rados Gateway Pools
On Tue, May 7, 2013 at 2:26 PM, Jeppesen, Nelson <[email protected]>
wrote:
> Now the .61 is out I have tried getting a second radosgw farm working
> but into an issue using a custom root/zone pool.
>
>
>
> The 'radosgw-admin zone set' and ' radosgw-admin zone info' commands
> are working fine except it keeps defaulting to using .rgw.root. I've
> tried the two settings, the one you gave and the one documented on
> ceph.com in my conf file but still no luck.
>
>
>
> My Ceph.conf
>
> ....
>
> rgw root zone pool = .rgw.zone2
>
> rgw cluster root pool = .rgw.zone2
Under what section is that? Note that usually you'd run radosgw-admin under the
client.admin user, so it might not get this configuration.
Try running the radosgw-admin --rgw-root-zone-pool=.rgw.zone2, see if it fixes
it for you.
Yehuda
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
