Hi, I had not been able to use ceph-deploy to prepare the OSDs. It seemed every time I execute this particular command (assuming running the data and journal on a same disk), I ended up with a message:
ceph-disk: Error: Command '['partprobe','/dev/cciss/c0d1']' returned non-zero exit status 1 FYI, I had some old HP hardware which instead of the standard /dev/sda and so on, the disks came out in the form of /dev/cciss/c0d0 etc. I had monitored the /dev/disk/by-partuuid throughout the prepare process and noticed that both the data and journal were created, but after some time the journal partition went missing and the above error came out. Has anyone encountered similar experience and work around for this issue. Thanks in advance. Regards, Luke ------------------------------------------------------------------ - - DISCLAIMER: This e-mail (including any attachments) is for the addressee(s) only and may contain confidential information. If you are not the intended recipient, please note that any dealing, review, distribution, printing, copying or use of this e-mail is strictly prohibited. If you have received this email in error, please notify the sender immediately and delete the original message. MIMOS Berhad is a research and development institution under the purview of the Malaysian Ministry of Science, Technology and Innovation. Opinions, conclusions and other information in this e- mail that do not relate to the official business of MIMOS Berhad and/or its subsidiaries shall be understood as neither given nor endorsed by MIMOS Berhad and/or its subsidiaries and neither MIMOS Berhad nor its subsidiaries accepts responsibility for the same. All liability arising from or in connection with computer viruses and/or corrupted e-mails is excluded to the fullest extent permitted by law.
_______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
