Hi Sam,
Thanks for your reply here. Unfortunately I didn't capture all this
data at the time of the issue. What I do have I've pasted below. FYI the only
way I found to fix this issue was to temporarily reduce the number of replicas
in the pool to 1. The stuck pgs then disappeared and so I then increased the
replicas back to 2 at this point. Obviously this is not a great workaround so I
am keen to get to the bottom of the problem here.
Thanks again for your help.
Chris
# ceph health detail
HEALTH_WARN 7 pgs stuck unclean
pg 3.5a is stuck unclean for 335339.172516, current state active, last acting
[5,4]
pg 3.54 is stuck unclean for 335339.157608, current state active, last acting
[15,7]
pg 3.55 is stuck unclean for 335339.167154, current state active, last acting
[16,9]
pg 3.1c is stuck unclean for 335339.174150, current state active, last acting
[8,16]
pg 3.a is stuck unclean for 335339.177001, current state active, last acting
[0,8]
pg 3.4 is stuck unclean for 335339.165377, current state active, last acting
[17,4]
pg 3.5 is stuck unclean for 335339.149507, current state active, last acting
[2,6]
# ceph pg 3.5a query
{ "state": "active",
"epoch": 699,
"up": [
5,
4],
"acting": [
5,
4],
"info": { "pgid": "3.5a",
"last_update": "413'688",
"last_complete": "413'688",
"log_tail": "0'0",
"last_backfill": "MAX",
"purged_snaps": "[]",
"history": { "epoch_created": 67,
"last_epoch_started": 644,
"last_epoch_clean": 644,
"last_epoch_split": 0,
"same_up_since": 643,
"same_interval_since": 643,
"same_primary_since": 561,
"last_scrub": "0'0",
"last_scrub_stamp": "2013-08-01 15:23:29.253783",
"last_deep_scrub": "0'0",
"last_deep_scrub_stamp": "2013-08-01 15:23:29.253783",
"last_clean_scrub_stamp": "2013-08-01 15:23:29.253783"},
"stats": { "version": "413'688",
"reported": "561'1484",
"state": "active",
"last_fresh": "2013-08-02 12:25:41.793582",
"last_change": "2013-08-02 09:54:08.163758",
"last_active": "2013-08-02 12:25:41.793582",
"last_clean": "2013-08-02 09:49:34.246621",
"last_became_active": "0.000000",
"last_unstale": "2013-08-02 12:25:41.793582",
"mapping_epoch": 641,
"log_start": "0'0",
"ondisk_log_start": "0'0",
"created": 67,
"last_epoch_clean": 67,
"parent": "0.0",
"parent_split_bits": 0,
"last_scrub": "0'0",
"last_scrub_stamp": "2013-08-01 15:23:29.253783",
"last_deep_scrub": "0'0",
"last_deep_scrub_stamp": "2013-08-01 15:23:29.253783",
"last_clean_scrub_stamp": "2013-08-01 15:23:29.253783",
"log_size": 0,
"ondisk_log_size": 0,
"stats_invalid": "0",
"stat_sum": { "num_bytes": 134217728,
"num_objects": 32,
"num_object_clones": 0,
"num_object_copies": 0,
"num_objects_missing_on_primary": 0,
"num_objects_degraded": 0,
"num_objects_unfound": 0,
"num_read": 0,
"num_read_kb": 0,
"num_write": 688,
"num_write_kb": 327680,
"num_scrub_errors": 0,
"num_shallow_scrub_errors": 0,
"num_deep_scrub_errors": 0,
"num_objects_recovered": 45,
"num_bytes_recovered": 188743680,
"num_keys_recovered": 0},
"stat_cat_sum": {},
"up": [
5,
4],
"acting": [
5,
4]},
"empty": 0,
"dne": 0,
"incomplete": 0,
"last_epoch_started": 644},
"recovery_state": [
{ "name": "Started\/Primary\/Active",
"enter_time": "2013-08-02 09:49:56.504882",
"might_have_unfound": [],
"recovery_progress": { "backfill_target": -1,
"waiting_on_backfill": 0,
"backfill_pos": "0\/\/0\/\/-1",
"backfill_info": { "begin": "0\/\/0\/\/-1",
"end": "0\/\/0\/\/-1",
"objects": []},
"peer_backfill_info": { "begin": "0\/\/0\/\/-1",
"end": "0\/\/0\/\/-1",
"objects": []},
"backfills_in_flight": [],
"pull_from_peer": [],
"pushing": []},
"scrub": { "scrubber.epoch_start": "0",
"scrubber.active": 0,
"scrubber.block_writes": 0,
"scrubber.finalizing": 0,
"scrubber.waiting_on": 0,
"scrubber.waiting_on_whom": []}},
{ "name": "Started",
"enter_time": "2013-08-02 09:49:55.501261"}]}
-----Original Message-----
From: Samuel Just [mailto:[email protected]]
Sent: 12 August 2013 22:52
To: Howarth, Chris [CCC-OT_IT]
Cc: [email protected]
Subject: Re: [ceph-users] Ceph pgs stuck unclean
Can you attach the output of:
ceph -s
ceph pg dump
ceph osd dump
and run
ceph osd getmap -o /tmp/osdmap
and attach /tmp/osdmap/
-Sam
On Wed, Aug 7, 2013 at 1:58 AM, Howarth, Chris <[email protected]> wrote:
> Hi,
>
> One of our OSD disks failed on a cluster and I replaced it, but
> when it failed it did not completely recover and I have a number of
> pgs which are stuck unclean:
>
>
>
> # ceph health detail
>
> HEALTH_WARN 7 pgs stuck unclean
>
> pg 3.5a is stuck unclean for 335339.172516, current state active, last
> acting [5,4]
>
> pg 3.54 is stuck unclean for 335339.157608, current state active, last
> acting [15,7]
>
> pg 3.55 is stuck unclean for 335339.167154, current state active, last
> acting [16,9]
>
> pg 3.1c is stuck unclean for 335339.174150, current state active, last
> acting [8,16]
>
> pg 3.a is stuck unclean for 335339.177001, current state active, last
> acting [0,8]
>
> pg 3.4 is stuck unclean for 335339.165377, current state active, last
> acting [17,4]
>
> pg 3.5 is stuck unclean for 335339.149507, current state active, last
> acting [2,6]
>
>
>
> Does anyone know how to fix these ? I tried the following, but this
> does not seem to work:
>
>
>
> # ceph pg 3.5 mark_unfound_lost revert
>
> pg has no unfound objects
>
>
>
> thanks
>
>
>
> Chris
>
> __________________________
>
> Chris Howarth
>
> OS Platforms Engineering
>
> Citi Architecture & Technology Engineering
>
> (e) [email protected]
>
> (t) +44 (0) 20 7508 3848
>
> (f) +44 (0) 20 7508 0964
>
> (mail-drop) CGC-06-3A
>
>
>
>
> _______________________________________________
> ceph-users mailing list
> [email protected]
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
