Hey Mark,
Sam must have mistaken me for someone else, as I'm not currently using
any non-standard hardware- or software-assisted caching on any of the
Ceph-clusters I manage.
Regards,
Oliver
On do, 2013-08-29 at 13:56 -0500, Mark Nelson wrote:
> Excellent news!
>
> Btw, Sam mentioned you are using flashcache. Would you mind talking a
> little bit about what you are doing and what kind of performance you
> see? This is an area I've been wanting to explore but haven't found the
> time yet.
>
> Mark
>
> On 08/29/2013 01:52 PM, Oliver Daudey wrote:
> > Hey Mark and list,
> >
> > FYI for you and the list: Samuel and I seem to have found and fixed the
> > remaining performance-problems. For those who can't wait, fixes are in
> > "wip-dumpling-perf2" and will probably be in the next point-release.
> >
> >
> > Regards,
> >
> > Oliver
> >
> > On 27-08-13 17:13, Mark Nelson wrote:
> >> Ok, definitely let us know how it goes! For what it's worth, I'm
> >> testing Sam's wip-dumpling-perf branch with the wbthrottle code disabled
> >> now and comparing it both to that same branch with it enabled along with
> >> 0.67.1. Don't have any perf data, but quite a bit of other data to look
> >> through, both in terms of RADOS bench and RBD.
> >>
> >> Mark
> >>
> >> On 08/27/2013 10:07 AM, Oliver Daudey wrote:
> >>> Hey Mark,
> >>>
> >>> That will take a day or so for me to know with enough certainty. With
> >>> the low CPU-usage and preliminary results today, I'm confident enough to
> >>> upgrade all OSDs in production and test the cluster all-Dumpling
> >>> tomorrow. For now, I only upgraded a single OSD and measured CPU-usage
> >>> and whatever performance-effects that had on the cluster, so if I would
> >>> lose that OSD, I could recover. :-) Will get back to you.
> >>>
> >>>
> >>> Regards,
> >>>
> >>> Oliver
> >>>
> >>> On 27-08-13 15:04, Mark Nelson wrote:
> >>>> Hi Olver/Matthew,
> >>>>
> >>>> Ignoring CPU usage, has speed remained slower as well?
> >>>>
> >>>> Mark
> >>>>
> >>>> On 08/27/2013 03:08 AM, Oliver Daudey wrote:
> >>>>> Hey Samuel,
> >>>>>
> >>>>> The "PGLog::check()" is now no longer visible in profiling, so it
> >>>>> helped
> >>>>> for that. Unfortunately, it doesn't seem to have helped to bring down
> >>>>> the OSD's CPU-loading much. Leveldb still uses much more than in
> >>>>> Cuttlefish. On my test-cluster, I didn't notice any difference in the
> >>>>> RBD bench-results, either, so I have to assume that it didn't help
> >>>>> performance much.
> >>>>>
> >>>>> Here's the `perf top' I took just now on my production-cluster with
> >>>>> your
> >>>>> new version, under regular load. Also note the "memcmp" and "memcpy",
> >>>>> which also don't show up when running a Cuttlefish-OSD:
> >>>>> 15.65% [kernel] [k]
> >>>>> intel_idle
> >>>>> 7.20% libleveldb.so.1.9 [.]
> >>>>> 0x3ceae
> >>>>> 6.28% libc-2.11.3.so [.]
> >>>>> memcmp
> >>>>> 5.22% [kernel] [k]
> >>>>> find_busiest_group
> >>>>> 3.92% kvm [.]
> >>>>> 0x2cf006
> >>>>> 2.40% libleveldb.so.1.9 [.]
> >>>>> leveldb::InternalKeyComparator::Compar
> >>>>> 1.95% [kernel] [k]
> >>>>> _raw_spin_lock
> >>>>> 1.69% [kernel] [k]
> >>>>> default_send_IPI_mask_sequence_phys
> >>>>> 1.46% libc-2.11.3.so [.]
> >>>>> memcpy
> >>>>> 1.17% libleveldb.so.1.9 [.]
> >>>>> leveldb::Block::Iter::Next()
> >>>>> 1.16% [kernel] [k]
> >>>>> hrtimer_interrupt
> >>>>> 1.07% [kernel] [k]
> >>>>> native_write_cr0
> >>>>> 1.01% [kernel] [k]
> >>>>> __hrtimer_start_range_ns
> >>>>> 1.00% [kernel] [k]
> >>>>> clockevents_program_event
> >>>>> 0.93% [kernel] [k]
> >>>>> find_next_bit
> >>>>> 0.93% libstdc++.so.6.0.13 [.]
> >>>>> std::string::_M_mutate(unsigned long,
> >>>>> 0.89% [kernel] [k]
> >>>>> cpumask_next_and
> >>>>> 0.87% [kernel] [k]
> >>>>> __schedule
> >>>>> 0.85% [kernel] [k]
> >>>>> _raw_spin_unlock_irqrestore
> >>>>> 0.85% [kernel] [k]
> >>>>> do_select
> >>>>> 0.84% [kernel] [k]
> >>>>> apic_timer_interrupt
> >>>>> 0.80% [kernel] [k]
> >>>>> fget_light
> >>>>> 0.79% [kernel] [k]
> >>>>> native_write_msr_safe
> >>>>> 0.76% [kernel] [k]
> >>>>> _raw_spin_lock_irqsave
> >>>>> 0.66% libc-2.11.3.so [.]
> >>>>> 0xdc6d8
> >>>>> 0.61% libpthread-2.11.3.so [.]
> >>>>> pthread_mutex_lock
> >>>>> 0.61% [kernel] [k]
> >>>>> tg_load_down
> >>>>> 0.59% [kernel] [k]
> >>>>> reschedule_interrupt
> >>>>> 0.59% libsnappy.so.1.1.2 [.]
> >>>>> snappy::RawUncompress(snappy::Source*,
> >>>>> 0.56% libstdc++.so.6.0.13 [.] std::string::append(char
> >>>>> const*, unsig
> >>>>> 0.54% [kvm_intel] [k]
> >>>>> vmx_vcpu_run
> >>>>> 0.53% [kernel] [k]
> >>>>> copy_user_generic_string
> >>>>> 0.53% [kernel] [k]
> >>>>> load_balance
> >>>>> 0.50% [kernel] [k]
> >>>>> rcu_needs_cpu
> >>>>> 0.45% [kernel] [k] fput
> >>>>>
> >>>>>
> >>>>> Regards,
> >>>>>
> >>>>> Oliver
> >>>>>
> >>>>> On ma, 2013-08-26 at 23:33 -0700, Samuel Just wrote:
> >>>>>> I just pushed a patch to wip-dumpling-log-assert (based on current
> >>>>>> dumpling head). I had disabled most of the code in PGLog::check() but
> >>>>>> left an (I thought) innocuous assert. It seems that with (at least)
> >>>>>> g++ 4.6.3, stl list::size() is linear in the size of the list, so that
> >>>>>> assert actually traverses the pg log on each operation. The patch in
> >>>>>> wip-dumpling-log-assert should disable that assert as well by default.
> >>>>>> Let me know if it helps.
> >>>>>>
> >>>>>> It should be built within an hour of this email.
> >>>>>> -Sam
> >>>>>>
> >>>>>> On Mon, Aug 26, 2013 at 10:46 PM, Matthew Anderson
> >>>>>> <[email protected]> wrote:
> >>>>>>> Hi Guys,
> >>>>>>>
> >>>>>>> I'm having the same problem as Oliver with 0.67.2. CPU usage is
> >>>>>>> around
> >>>>>>> double that of the 0.61.8 OSD's in the same cluster which appears to
> >>>>>>> be causing the performance decrease.
> >>>>>>>
> >>>>>>> I did a perf comparison (not sure if I did it right but it seems ok).
> >>>>>>> Both hosts are the same spec running Ubuntu 12.04.1 (3.2 kernel),
> >>>>>>> journal and osd data is on an SSD, OSD's are in the same pool with
> >>>>>>> the
> >>>>>>> same weight and the perf tests were run at the same time on a
> >>>>>>> realworld load consisting of RBD traffic only.
> >>>>>>>
> >>>>>>> Dumpling -
> >>>>>>>
> >>>>>>> Events: 332K cycles
> >>>>>>> 17.93% ceph-osd libc-2.15.so [.] 0x15d523
> >>>>>>> 17.03% ceph-osd ceph-osd [.] 0x5c2897
> >>>>>>> 4.66% ceph-osd ceph-osd [.]
> >>>>>>> leveldb::InternalKeyComparator::Compare(leveldb::Slice const&, level
> >>>>>>> 3.46% ceph-osd ceph-osd [.]
> >>>>>>> leveldb::Block::Iter::Next()
> >>>>>>> 2.70% ceph-osd libstdc++.so.6.0.16 [.]
> >>>>>>> std::string::_M_mutate(unsigned long, unsigned long, unsigned long)
> >>>>>>> 2.60% ceph-osd ceph-osd [.] PGLog::check()
> >>>>>>> 2.57% ceph-osd [kernel.kallsyms] [k] __ticket_spin_lock
> >>>>>>> 2.49% ceph-osd ceph-osd [.] ceph_crc32c_le_intel
> >>>>>>> 1.93% ceph-osd libsnappy.so.1.1.2 [.]
> >>>>>>> snappy::RawUncompress(snappy::Source*, char*)
> >>>>>>> 1.53% ceph-osd libstdc++.so.6.0.16 [.]
> >>>>>>> std::string::append(char
> >>>>>>> const*, unsigned long)
> >>>>>>> 1.47% ceph-osd libtcmalloc.so.0.1.0 [.] operator new(unsigned
> >>>>>>> long)
> >>>>>>> 1.33% ceph-osd [kernel.kallsyms] [k]
> >>>>>>> copy_user_generic_string
> >>>>>>> 0.98% ceph-osd libtcmalloc.so.0.1.0 [.] operator
> >>>>>>> delete(void*)
> >>>>>>> 0.90% ceph-osd libstdc++.so.6.0.16 [.]
> >>>>>>> std::string::assign(char
> >>>>>>> const*, unsigned long)
> >>>>>>> 0.75% ceph-osd libstdc++.so.6.0.16 [.]
> >>>>>>> std::string::_M_replace_safe(unsigned long, unsigned long, char cons
> >>>>>>> 0.58% ceph-osd [kernel.kallsyms] [k] wait_sb_inodes
> >>>>>>> 0.55% ceph-osd ceph-osd [.]
> >>>>>>> leveldb::Block::Iter::Valid() const
> >>>>>>> 0.51% ceph-osd libtcmalloc.so.0.1.0 [.]
> >>>>>>> tcmalloc::ThreadCache::ReleaseToCentralCache(tcmalloc::ThreadCache::
> >>>>>>> 0.50% ceph-osd libtcmalloc.so.0.1.0 [.]
> >>>>>>> tcmalloc::CentralFreeList::FetchFromSpans()
> >>>>>>> 0.47% ceph-osd libstdc++.so.6.0.16 [.] 0x9ebc8
> >>>>>>> 0.46% ceph-osd libc-2.15.so [.] vfprintf
> >>>>>>> 0.45% ceph-osd [kernel.kallsyms] [k] find_busiest_group
> >>>>>>> 0.45% ceph-osd libstdc++.so.6.0.16 [.]
> >>>>>>> std::string::resize(unsigned long, char)
> >>>>>>> 0.43% ceph-osd libpthread-2.15.so [.] pthread_mutex_unlock
> >>>>>>> 0.41% ceph-osd [kernel.kallsyms] [k] iput_final
> >>>>>>> 0.40% ceph-osd ceph-osd [.]
> >>>>>>> leveldb::Block::Iter::Seek(leveldb::Slice const&)
> >>>>>>> 0.39% ceph-osd libc-2.15.so [.] _IO_vfscanf
> >>>>>>> 0.39% ceph-osd ceph-osd [.]
> >>>>>>> leveldb::Block::Iter::key() const
> >>>>>>> 0.39% ceph-osd libtcmalloc.so.0.1.0 [.]
> >>>>>>> tcmalloc::CentralFreeList::ReleaseToSpans(void*)
> >>>>>>> 0.37% ceph-osd libstdc++.so.6.0.16 [.]
> >>>>>>> std::basic_ostream<char,
> >>>>>>> std::char_traits<char> >& std::__ostream_in
> >>>>>>>
> >>>>>>>
> >>>>>>> Cuttlefish -
> >>>>>>>
> >>>>>>> Events: 160K cycles
> >>>>>>> 7.53% ceph-osd [kernel.kallsyms] [k] __ticket_spin_lock
> >>>>>>> 6.26% ceph-osd libc-2.15.so [.] 0x89115
> >>>>>>> 3.06% ceph-osd ceph-osd [.] ceph_crc32c_le
> >>>>>>> 2.66% ceph-osd libtcmalloc.so.0.1.0 [.] operator new(unsigned
> >>>>>>> long)
> >>>>>>> 2.46% ceph-osd [kernel.kallsyms] [k] find_busiest_group
> >>>>>>> 1.80% ceph-osd libtcmalloc.so.0.1.0 [.] operator
> >>>>>>> delete(void*)
> >>>>>>> 1.42% ceph-osd [kernel.kallsyms] [k] try_to_wake_up
> >>>>>>> 1.27% ceph-osd ceph-osd [.] 0x531fb6
> >>>>>>> 1.21% ceph-osd libstdc++.so.6.0.16 [.] 0x9ebc8
> >>>>>>> 1.14% ceph-osd [kernel.kallsyms] [k] wait_sb_inodes
> >>>>>>> 1.02% ceph-osd libc-2.15.so [.] _IO_vfscanf
> >>>>>>> 1.01% ceph-osd [kernel.kallsyms] [k] update_shares
> >>>>>>> 0.98% ceph-osd [kernel.kallsyms] [k]
> >>>>>>> filemap_fdatawait_range
> >>>>>>> 0.90% ceph-osd libstdc++.so.6.0.16 [.]
> >>>>>>> std::basic_ostream<char,
> >>>>>>> std::char_traits<char> >& std
> >>>>>>> 0.89% ceph-osd [kernel.kallsyms] [k] iput_final
> >>>>>>> 0.79% ceph-osd libstdc++.so.6.0.16 [.]
> >>>>>>> std::basic_string<char,
> >>>>>>> std::char_traits<char>, std::a
> >>>>>>> 0.79% ceph-osd [kernel.kallsyms] [k]
> >>>>>>> copy_user_generic_string
> >>>>>>> 0.78% ceph-osd libc-2.15.so [.] vfprintf
> >>>>>>> 0.70% ceph-osd libtcmalloc.so.0.1.0 [.]
> >>>>>>> tcmalloc::ThreadCache::ReleaseToCentralCache(tcmalloc:
> >>>>>>> 0.69% ceph-osd [kernel.kallsyms] [k] __d_lookup_rcu
> >>>>>>> 0.69% ceph-osd libtcmalloc.so.0.1.0 [.]
> >>>>>>> tcmalloc::CentralFreeList::FetchFromSpans()
> >>>>>>> 0.66% ceph-osd [kernel.kallsyms] [k] igrab
> >>>>>>> 0.63% ceph-osd [kernel.kallsyms] [k] update_cfs_load
> >>>>>>> 0.63% ceph-osd [kernel.kallsyms] [k] link_path_walk
> >>>>>>>
> >>>>>>> If you'd like some more tests run just let me know, more than happy
> >>>>>>> to help
> >>>>>>>
> >>>>>>> Thanks
> >>>>>>> -Matt
> >>>>>>
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> ceph-users mailing list
> >>>>> [email protected]
> >>>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> >>>>>
> >>>>
> >>>> _______________________________________________
> >>>> ceph-users mailing list
> >>>> [email protected]
> >>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> >>>>
> >>>
> >>> _______________________________________________
> >>> ceph-users mailing list
> >>> [email protected]
> >>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> >>>
> >>
> >> _______________________________________________
> >> ceph-users mailing list
> >> [email protected]
> >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> >>
> >
>
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
