Is the form: auth cluster required = none or auth_cluster_required = none?
("_"s as a word separator)
-----Original Message-----
From: John Wilkins [mailto:[email protected]]
Sent: Tuesday, September 24, 2013 11:43 AM
To: Aronesty, Erik
Cc: Snider, Tim; Gary Mazzaferro; [email protected]
Subject: Re: [ceph-users] ceph.conf changes and restarting ceph.
From your pastie details, it looks like you are using "auth supported = none".
That's pre 0.51, as noted in the documentation. Perhaps I should omit the old
usage or omit it entirely.
It should look like this:
auth cluster required = none
auth service required = none
auth client required = none
not
auth supported = none
On Tue, Sep 24, 2013 at 8:00 AM, Aronesty, Erik
<[email protected]> wrote:
> I did the same thing, restarted with upstart, and I still need to use
> authentication. Not sure why yet. Maybe I didn’t change the /etc/ceph
> configs on all the nodes….
>
>
>
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Snider, Tim
> Sent: Tuesday, September 24, 2013 9:15 AM
> To: Gary Mazzaferro; John Wilkins
> Cc: [email protected]
>
>
> Subject: Re: [ceph-users] ceph.conf changes and restarting ceph.
>
>
>
> Authentication works. I was interested in trying it without authentication.
> I didn’t see the upstart link earlier.
>
> Is the plan to only use upstart and not service for Dumpling and beyond?
>
> Tim
>
>
>
> From: Gary Mazzaferro [mailto:[email protected]]
> Sent: Tuesday, September 24, 2013 1:16 AM
> To: John Wilkins
> Cc: Snider, Tim; [email protected]
> Subject: Re: [ceph-users] ceph.conf changes and restarting ceph.
>
>
>
> Hi John
>
>
>
> Why ? do the 'service' scripts not work ? (sorry I don't have access
> to the systems from my location) I used dumpling and ceph-deploy on debian.
>
>
>
> -gary
>
>
>
>
>
>
>
>
>
> On Mon, Sep 23, 2013 at 11:25 PM, John Wilkins
> <[email protected]>
> wrote:
>
> I will update the Cephx docs. The usage in those docs for restarting
> is for Debian/Ubuntu deployed with mkcephfs. If you are using
> Dumpling and deployed with ceph-deploy, you will need to use Upstart.
> See
> http://ceph.com/docs/master/rados/operations/operating/#running-ceph-w
> ith-upstart for details. If you are using Ceph on RHEL, CentOS, etc.,
> use sysvinit.
>
>
> On Mon, Sep 23, 2013 at 3:21 PM, Gary Mazzaferro <[email protected]> wrote:
>> Tim
>>
>> Did it work with authentication enabled ?
>>
>> -gary
>>
>>
>> On Mon, Sep 23, 2013 at 2:10 PM, Snider, Tim <[email protected]>
>> wrote:
>>>
>>> I modified /etc/ceph.conf for no authentication and to specify both
>>> private and public networks. /etc/ceph/ceph.conf was distributed to
>>> all nodes in the cluster
>>>
>>> ceph was restarted on all nodes using "service ceph -a restart".
>>>
>>> After that authentication is still required and no ports are open on
>>> the cluster facing (192.168.10.0) network.
>>>
>>> Details in http://pastie.org/8349534.
>>>
>>> What am I missing something?
>>>
>>>
>>>
>>> Thanks,
>>>
>>> Tim
>>>
>>>
>>> _______________________________________________
>>> ceph-users mailing list
>>> [email protected]
>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>
>>
>>
>> _______________________________________________
>> ceph-users mailing list
>> [email protected]
>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>
>
> --
> John Wilkins
> Senior Technical Writer
> Intank
> [email protected]
> (415) 425-9599
> http://inktank.com
>
>
--
John Wilkins
Senior Technical Writer
Intank
[email protected]
(415) 425-9599
http://inktank.com
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
