>-----Original Message-----
>From: Yehuda Sadeh [mailto:[email protected]]
>Sent: Friday, September 27, 2013 9:30 AM
>To: Gruher, Joseph R
>Cc: [email protected]
>Subject: Re: [ceph-users] failure starting radosgw after setting up object
>storage
>
>On Wed, Sep 25, 2013 at 2:07 PM, Gruher, Joseph R
><[email protected]> wrote:
>> Hi all-
>>
>>
>>
>> I am following the object storage quick start guide. I have a cluster
>> with two OSDs and have followed the steps on both. Both are failing
>> to start radosgw but each in a different manner. All the previous
>> steps in the quick start guide appeared to complete successfully. Any
>> tips on how to debug from here? Thanks!
>>
>>
>>
>>
>>
>> OSD1:
>>
>>
>>
>> ceph@cephtest05:/etc/ceph$ sudo /etc/init.d/radosgw start
>>
>> ceph@cephtest05:/etc/ceph$
>>
>>
>>
>> ceph@cephtest05:/etc/ceph$ sudo /etc/init.d/radosgw status
>>
>> /usr/bin/radosgw is not running.
>>
>> ceph@cephtest05:/etc/ceph$
>>
>>
>>
>> ceph@cephtest05:/etc/ceph$ cat /var/log/ceph/radosgw.log
>>
>> ceph@cephtest05:/etc/ceph$
>>
>>
>>
>>
>>
>> OSD2:
>>
>>
>>
>> ceph@cephtest06:/etc/ceph$ sudo /etc/init.d/radosgw start
>>
>> Starting client.radosgw.gateway...
>>
>> 2013-09-25 14:03:01.235789 7f713d79d780 -1 WARNING: libcurl doesn't
>> support
>> curl_multi_wait()
>>
>> 2013-09-25 14:03:01.235797 7f713d79d780 -1 WARNING: cross zone /
>> region transfer performance may be affected
>>
>> ceph@cephtest06:/etc/ceph$
>>
>>
>>
>> ceph@cephtest06:/etc/ceph$ sudo /etc/init.d/radosgw status
>>
>> /usr/bin/radosgw is not running.
>>
>> ceph@cephtest06:/etc/ceph$
>>
>>
>>
>> ceph@cephtest06:/etc/ceph$ cat /var/log/ceph/radosgw.log
>>
>> 2013-09-25 14:03:01.235760 7f713d79d780 0 ceph version 0.67.3
>> (408cd61584c72c0d97b774b3d8f95c6b1b06341a), process radosgw, pid 13187
>>
>> 2013-09-25 14:03:01.235789 7f713d79d780 -1 WARNING: libcurl doesn't
>> support
>> curl_multi_wait()
>>
>> 2013-09-25 14:03:01.235797 7f713d79d780 -1 WARNING: cross zone /
>> region transfer performance may be affected
>>
>> 2013-09-25 14:03:01.245786 7f713d79d780 0 librados:
>> client.radosgw.gateway authentication error (1) Operation not
>> permitted
>>
>> 2013-09-25 14:03:01.246526 7f713d79d780 -1 Couldn't init storage
>> provider
>> (RADOS)
>
>
>This means that the radosgw process cannot connect to the cluster due to
>user / key set up. Make sure that the user for radosgw exists, and that the
>ceph keyring file (on the radosgw side) has the correct credentials set.
>
>
>Yehuda
Thanks for the response. I will look into these. Is it possible you could
provide more detail on how to check these? Sorry, still fairly new to Ceph
(and object storage in general). Thanks!
>
>>
>> ceph@cephtest06:/etc/ceph$
>>
>>
>>
>>
>>
>> For reference, I think cluster health is OK:
>>
>>
>>
>> ceph@cephtest06:/etc/ceph$ sudo ceph status
>>
>> cluster a45e6e54-70ef-4470-91db-2152965deec5
>>
>> health HEALTH_WARN clock skew detected on mon.cephtest03,
>> mon.cephtest04
>>
>> monmap e1: 3 mons at
>> {cephtest02=10.0.0.2:6789/0,cephtest03=10.0.0.3:6789/0,cephtest04=10.0
>> .0.4:6789/0}, election epoch 6, quorum 0,1,2
>> cephtest02,cephtest03,cephtest04
>>
>> osdmap e9: 2 osds: 2 up, 2 in
>>
>> pgmap v439: 192 pgs: 192 active+clean; 0 bytes data, 72548 KB
>> used, 1998 GB / 1999 GB avail
>>
>> mdsmap e1: 0/0/1 up
>>
>>
>>
>> ceph@cephtest06:/etc/ceph$ sudo ceph health
>>
>> HEALTH_WARN clock skew detected on mon.cephtest03, mon.cephtest04
>>
>>
>> _______________________________________________
>> ceph-users mailing list
>> [email protected]
>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
