Hi Nicolas
just fyi
rbd format 2 is not supported yet by the linux kernel (module)
it only can be used as a target for virtual machines using librbd
see: man rbd --> --image-format
shrinking time: same happend to me,
rbd (v1) device
took about a week to shrink from 1PB to 10TB
the good news: I had already about 5TB data on it
and ongoing processes using the device and
neither was there any data loss nor was there
a significant performance issue.
(3mons + 4machines with different amount of OSDs each)
Bernhard
> EDIT: sorry about the "No such file" error
>
> Now, it seems this is a separate issue: the system I was using was
> apparently unable to map devices to images in format 2. I will be
> investigating that further before mentioning it again.
>
> I would still appreciate answers about the 1PB image and the time to
> shrink it.
>
> Best regards,
>
> Nicolas Canceill
> Scalable Storage Systems
> SURFsara (Amsterdam, NL)
>
>
> On 11/19/2013 03:20 PM, nicolasc wrote:
> > Hi every one,
> >
> > In the course of playing with RBD, I noticed a few things:
> >
> > * The RBD images are so thin-provisioned, you can create arbitrarily
> > large ones.
> > On my 0.72.1 freshly-installed empty 200TB cluster, I was able to
> > create a 1PB image:
> >
> > $ rbd create --image-format 2 --size 1073741824 test_img
> >
> > This command is successful, and I can check the image status:
> >
> > $ rbd info test
> > rbd image 'test':
> > size 1024 TB in 268435456 objects
> > order 22 (4096 kB objects)
> > block_name_prefix: rbd_data.19f76b8b4567
> > format: 2
> > features: layering
> >
> > * Such an oversized image seems unmountable on my 3.2.46 kernel.
> > However the error message is not very explicit:
> >
> > $ rbd map test_img
> > rbd: add failed: (2) No such file or directory
> >
> > There is no error or explanation to be seen anywhere in the logs.
> > dmesg reports the connection to the cluster through RBD as usual,
> > and that's it.
> > Using the exact same commands with image size 32GB will successfully
> > map the device.
> >
> > * Such an oversize image takes an awfully long time to shrink or remove.
> > However, the image has just been created and is empty.
> > In RADOS, I only see the corresponding rbd_id and rbd_header, but no
> > data object at all.
> > Still, removing the 1PB image takes roughly 8 hours.
> >
> > Cluster config:
> > 3 mons, 8nodes * 72osds, about 4800pgs (2400pgs in pool "rbd")
> > cluster and public network are 10GbE, each node has 8 cores and 64GB mem
> >
> > Oh, so my questions:
> > - why is it possible to create an image five times the size of the
> > cluster without warning?
> > - where could this "No such file" error come from?
> > - why does it take long to shrink/delete a
> > large-but-empty-and-thin-provisioned image?
> >
> > I know that 1PB is oversized ("No such file" when trying to map), and
> > 32GB is not, so I am currently looking for the oversize threshold.
> > More info coming soon.
> >
> > Best regards,
> >
> > Nicolas Canceill
> > Scalable Storage Systems
> > SURFsara (Amsterdam, NL)
> >
> > _______________________________________________
> > ceph-users mailing list
> > [email protected]
> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> _______________________________________________
> ceph-users mailing list
> [email protected]
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
--
Bernhard Glomm
IT Administration
Phone:
+49 (30) 86880 134
Fax:
+49 (30) 86880 100
Skype:
bernhard.glomm.ecologic
Ecologic Institut gemeinnützige GmbH | Pfalzburger Str. 43/44 | 10717
Berlin | Germany
GF: R. Andreas Kraemer | AG: Charlottenburg HRB 57947 |
USt/VAT-IdNr.: DE811963464
Ecologic™ is a Trade Mark (TM) of Ecologic Institut gemeinnützige GmbH
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
