I seems that client admin socket has a life cycle, if any operation issued to
rbd, rbd admin socket appears in /var/run/ceph directory, however, when you
use this admin socket to dump perf counter, rbd cache perf counter is not in
the results:
The output of ' ceph --admin-daemon /var/run/ceph/rbd-12856.asok perf dump '
{ "objecter": { "op_active": 0,
"op_laggy": 0,
"op_send": 0,
"op_send_bytes": 0,
"op_resend": 0,
"op_ack": 0,
"op_commit": 0,
"op": 0,
"op_r": 0,
"op_w": 0,
"op_rmw": 0,
"op_pg": 0,
"osdop_stat": 0,
"osdop_create": 0,
"osdop_read": 0,
"osdop_write": 0,
"osdop_writefull": 0,
"osdop_append": 0,
"osdop_zero": 0,
"osdop_truncate": 0,
"osdop_delete": 0,
"osdop_mapext": 0,
"osdop_sparse_read": 0,
"osdop_clonerange": 0,
"osdop_getxattr": 0,
"osdop_setxattr": 0,
"osdop_cmpxattr": 0,
"osdop_rmxattr": 0,
"osdop_resetxattrs": 0,
"osdop_tmap_up": 0,
"osdop_tmap_put": 0,
"osdop_tmap_get": 0,
"osdop_call": 0,
"osdop_watch": 0,
"osdop_notify": 0,
"osdop_src_cmpxattr": 0,
"osdop_pgls": 0,
"osdop_pgls_filter": 0,
"osdop_other": 0,
"linger_active": 0,
"linger_send": 0,
"linger_resend": 0,
"poolop_active": 0,
"poolop_send": 0,
"poolop_resend": 0,
"poolstat_active": 0,
"poolstat_send": 0,
"poolstat_resend": 0,
"statfs_active": 0,
"statfs_send": 0,
"statfs_resend": 0,
"command_active": 0,
"command_send": 0,
"command_resend": 0,
"map_epoch": 0,
"map_full": 0,
"map_inc": 0,
"osd_sessions": 0,
"osd_session_open": 0,
"osd_session_close": 0,
"osd_laggy": 0},
"throttle-msgr_dispatch_throttler-radosclient": { "val": 0,
"max": 104857600,
"get": 14,
"get_sum": 7540,
"get_or_fail_fail": 0,
"get_or_fail_success": 0,
"take": 0,
"take_sum": 0,
"put": 14,
"put_sum": 7540,
"wait": { "avgcount": 0,
"sum": 0.000000000}},
"throttle-objecter_bytes": { "val": 0,
"max": 104857600,
"get": 0,
"get_sum": 0,
"get_or_fail_fail": 0,
"get_or_fail_success": 0,
"take": 0,
"take_sum": 0,
"put": 0,
"put_sum": 0,
"wait": { "avgcount": 0,
"sum": 0.000000000}},
"throttle-objecter_ops": { "val": 0,
"max": 1024,
"get": 0,
"get_sum": 0,
"get_or_fail_fail": 0,
"get_or_fail_success": 0,
"take": 0,
"take_sum": 0,
"put": 0,
"put_sum": 0,
"wait": { "avgcount": 0,
"sum": 0.000000000}}}
The results did not include rbd cache perf counter, where in
src/osdc/ObjectCacher.cc , definitely define rbd cache perf counter, below is a
snapshot of rbd cache perf counter in src/osdc/ObjectCacher.cc
void ObjectCacher::perf_start()
{
string n = "objectcacher-" + name;
PerfCountersBuilder plb(cct, n, l_objectcacher_first, l_objectcacher_last);
plb.add_u64_counter(l_objectcacher_cache_ops_hit, "cache_ops_hit");
plb.add_u64_counter(l_objectcacher_cache_ops_miss, "cache_ops_miss");
plb.add_u64_counter(l_objectcacher_cache_bytes_hit, "cache_bytes_hit");
plb.add_u64_counter(l_objectcacher_cache_bytes_miss, "cache_bytes_miss");
plb.add_u64_counter(l_objectcacher_data_read, "data_read");
plb.add_u64_counter(l_objectcacher_data_written, "data_written");
plb.add_u64_counter(l_objectcacher_data_flushed, "data_flushed");
plb.add_u64_counter(l_objectcacher_overwritten_in_flush,
"data_overwritten_while_flushing");
plb.add_u64_counter(l_objectcacher_write_ops_blocked, "write_ops_blocked");
plb.add_u64_counter(l_objectcacher_write_bytes_blocked,
"write_bytes_blocked");
plb.add_time(l_objectcacher_write_time_blocked, "write_time_blocked");
perfcounter = plb.create_perf_counters();
cct->get_perfcounters_collection()->add(perfcounter);
}
My question is how to get this rbd cache perf counter? Any tips will be great
appreciated.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Shu, Xinxin
Sent: Tuesday, November 26, 2013 2:32 PM
To: Mike Dawson
Cc: [email protected]
Subject: Re: [ceph-users] how to enable rbd cache
Hi mike, I enable rbd admin sockets according to your suggestions, I add admin
socket option in my ceph.conf, but in /var/run/ceph directory , there is no
asok file, I used to nova to boot instances. Below is my steps to enable rbd
admin socket. If there is something wrong, please let me know:
1: add rbd admin socket to /etc/ceph/ceph.conf, here is my ceph.conf on client
hosts
[global]
log file = /var/log/ceph/$name.log
max open files = 131072
auth cluster required = none
auth service required = none
auth client required = none
rbd cache = true
debug perfcounter = 20
[client.volumes]
admin socket=/var/run/ceph/rbd-$pid.asok
[mon.a]
host = {monitor_host_name}
mon addr = {monitor_host_addr}
2: modify in /etc/apparmor.d/abstractions/libvirt-qemu
Add
# for rbd
capability mknod,
# for rbd
/etc/ceph/ceph.conf r,
/var/log/ceph/* rw,
/var/run/ceph/** rw,
Then restart libvirt-bin and nova-compute service
3: recreate nova instances and attach rbd, then execute 'dd if=/dev/zero
of=/dev/vdb bs=64k', after that, check /var/run/ceph/rbd-$pid.asok socket, but
it did not exist.
My ceph version was cuttlefish. Openstack is folsom. Is there anything wired
for you? Please let me know.
-----Original Message-----
From: Mike Dawson [mailto:[email protected]]
Sent: Tuesday, November 26, 2013 12:41 AM
To: Shu, Xinxin
Cc: Gregory Farnum; Mark Nelson; [email protected]
Subject: Re: [ceph-users] how to enable rbd cache
Greg is right, you need to enable RBD admin sockets. This can be a bit tricky
though, so here are a few tips:
1) In ceph.conf on the compute node, explicitly set a location for the admin
socket:
[client.volumes]
admin socket = /var/run/ceph/rbd-$pid.asok
In this example, libvirt/qemu is running with permissions from
ceph.client.volumes.keyring. If you use something different, adjust
accordingly. You can put this under a more generic [client] section, but there
are some downsides (like a new admin socket for each ceph cli command).
2) Watch for permissions issues creating the admin socket at the path you used
above. For me, I needed to explicitly grant some permissions in
/etc/apparmor.d/abstractions/libvirt-qemu, specifically I had to add:
# for rbd
capability mknod,
and
# for rbd
/etc/ceph/ceph.conf r,
/var/log/ceph/* rw,
/{,var/}run/ceph/** rw,
3) Be aware that if you have multiple rbd volumes attached to a single rbd
image, you'll only get an admin socket to the volume mounted last.
If you can set admin_socket via the libvirt xml for each volume, you can avoid
this issue. This thread will explain better:
http://www.mail-archive.com/[email protected]/msg16168.html
4) Once you get an RBD admin socket, query it like:
ceph --admin-daemon /var/run/ceph/rbd-29050.asok config show | grep rbd
Cheers,
Mike Dawson
On 11/25/2013 11:12 AM, Gregory Farnum wrote:
> On Mon, Nov 25, 2013 at 5:58 AM, Mark Nelson <[email protected]> wrote:
>> On 11/25/2013 07:21 AM, Shu, Xinxin wrote:
>>>
>>> Recently , I want to enable rbd cache to identify performance
>>> benefit. I add rbd_cache=true option in my ceph configure file, I
>>> use 'virsh attach-device' to attach rbd to vm, below is my vdb xml file.
>>
>>
>> Ceph configuration files are a bit confusing because sometimes you'll
>> see something like "rbd_cache" listed somewhere but in the ceph.conf
>> file you'll want a space instead:
>>
>> rbd cache = true
>>
>> with no underscore. That should (hopefully) fix it for you!
>
> I believe the config file will take either format.
>
> The RBD cache is a client-side thing, though, so it's not ever going
> to show up in the OSD! You want to look at the admin socket created by
> QEMU (via librbd) to see if it's working. :) -Greg -Greg
>
>>
>>>
>>> <disk type='network' device='disk'>
>>>
>>> <driver name='qemu' type='raw' cache='writeback'/>
>>>
>>> <source protocol='rbd'
>>>
>>> name='rbd/node12_2:rbd_cache=true:rbd_cache_writethrough_until_flush
>>> =true'/>
>>>
>>> <target dev='vdb' bus='virtio'/>
>>>
>>> <serial>6b5ff6f4-9f8c-4fe0-84d6-9d795967c7dd</serial>
>>>
>>> <address type='pci' domain='0x0000' bus='0x00' slot='0x06'
>>> function='0x0'/>i
>>>
>>> </disk>
>>>
>>> I do not know this is ok to enable rbd cache. I see perf counter for
>>> rbd cache in source code, but when I used admin daemon to check rbd
>>> cache statistics,
>>>
>>> Ceph -admin-daemon /var/run/ceph/ceph-osd.0.asok perf dump
>>>
>>> But I did not get any rbd cahce flags.
>>>
>>> My question is how to enable rbd cahce and check rbd cache perf
>>> counter, or how can I make sure rbd cache is enabled, any tips will
>>> be appreciated? Thanks in advanced.
>>>
>>>
>>>
>>> _______________________________________________
>>> ceph-users mailing list
>>> [email protected]
>>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>>>
>>
>> _______________________________________________
>> ceph-users mailing list
>> [email protected]
>> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> _______________________________________________
> ceph-users mailing list
> [email protected]
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
