take a look at http://www.supermicro.com/products/nfo/FatTwin.cfm http://www.supermicro.com/products/system/4U/F617/SYS-F617H6-FTPTL_.cfm
On 04/07/2014 01:13 PM, Michal Humpula wrote:
Hi everybody, I'm looking for any hints on how to choose the hardware for small ceph cluster, roughly size of a 10-20TB. Primary purpose of this cluster is to have a centralized (from the client point of view), but fault tolerant storage for images served by webserver (i.e. mostly read IO). I was thinking to buy a microcloud supermicro, two of these: http://www.supermicro.com/products/system/3U/5038/SYS-5038ML-H8TRF.cfm Single node has two disks, so I would put in one SSD on system an OSD journal and one 3TB SATA disk for data. My concern is, that this goes against recommendations mentioned in http://ceph.com/docs/master/start/hardware-recommendations/ i.e. putting the journal and the system on the same disk, but the system IO should be minimal in this setup, if I'm not mistaken. I would welcome any recommendation of how to best pull this off with the Ceph. Cheers Michal _______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
-- Alvin Starr || voice: (905)513-7688 Netvel Inc. || Cell: (416)806-0133 [email protected] || _______________________________________________ ceph-users mailing list [email protected] http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
