Dear all ,
i have install tgt from http://ceph.com/packages/ceph-extras/debian
have create pool and image for iscsi.
but when i want to connect this iscsi from windows 2008 iscsi initiator,
can find, but status is not active . i do not know why?
############ some step i made for ceph iscsi target #####
rbd create volume20G --size 20480 --pool iscsi
root@ceph-admin:~# rados -p iscsi ls
volume20G.rbd
rbd_directory
vi /etc/tgt/targets.conf
<target iqn.2014-07.ceph-admin.lab.com:volume20G>
driver iscsi
bs-type rbd
backing-store iscsi/volume20G
initiator-address ALL
</target>
root@ceph-admin:~/my-cluster# tgtadm -s
Target 1: iqn.2014-07.ceph-admin.lab.com:volume20G
System information:
Driver: iscsi
State: ready
I_T nexus information:
LUN information:
LUN: 0
Type: controller
SCSI ID: IET 00010000
SCSI SN: beaf10
Size: 0 MB, Block size: 1
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: null
Backing store path: None
Backing store flags:
LUN: 1
Type: disk
SCSI ID: IET 00010001
SCSI SN: beaf11
Size: 21475 MB, Block size: 512
Online: Yes
Removable media: No
Prevent removal: No
Readonly: No
SWP: No
Thin-provisioning: No
Backing store type: rbd
Backing store path: iscsi/volume20G
Backing store flags:
Account information:
ACL information:
ALL
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
