Dell - Internal Use - Confidential
Matt
Thanks for responding
As suggested I tried to set replication to 2X by usng commands you provided
$ceph osd pool set data size 2
$ceph osd pool set data min_size 2
$ceph osd pool set rbd size 2
$ceph osd pool set rbd min_size 2
$ceph osd pool set metadata size 2
$ceph osd pool set metadata min_size 2
It told me -
set pool 0 size to 2
set pool 0 min_size to 2
set pool 2 size to 2
set pool 2 min_size to 2
set pool 1 size to 2
set pool 1 min_size to 2
To verify that pool size had indeed changed - I checked again
$ceph osd dump | grep 'rep size'
pool 0 'data' rep size 2 crush_ruleset 0 object_hash rjenkins pg_num 64 pgp_num
64 last_change 90 owner 0 crash_replay_interval 45
pool 1 'metadata' rep size 2 crush_ruleset 1 object_hash rjenkins pg_num 64
pgp_num 64 last_change 94 owner 0
pool 2 'rbd' rep size 2 crush_ruleset 2 object_hash rjenkins pg_num 64 pgp_num
64 last_change 92 owner 0
pool 3 'datapool' rep size 2 crush_ruleset 2 object_hash rjenkins pg_num 10
pgp_num 10 last_change 38 owner 0
However - my cluster is still in same state
$ceph -s
health HEALTH_WARN 202 pgs stuck inactive; 202 pgs stuck unclean
monmap e1: 1 mons at {slesceph1=160.110.73.200:6789/0}, election epoch 1,
quorum 0 slesceph1
osdmap e106: 2 osds: 2 up, 2 in
pgmap v171: 202 pgs: 202 creating; 0 bytes data, 10306 MB used, 71573 MB /
81880 MB avail
mdsmap e1: 0/0/1 up
Yogesh Devi,
Architect, Dell Cloud Clinical Archive
Dell
Land Phone +91 80 28413000 Extension - 2781
Hand Phone +91 99014 71082
From: Matt Harlum [mailto:[email protected]]
Sent: Saturday, August 02, 2014 6:01 AM
To: Devi, Yogesh
Cc: Pulicken, Antony
Subject: Re: [ceph-users] Placement groups forever in "creating" state and dont
map to OSD
Hi Yogesh,
By default ceph is configured to create 3 replicas of the data, with only 3
OSDs it cannot create all of the pgs required to do this
You will need to change the replication to 2x for your pools, this can be done
like so:
ceph odd pool set data size 2
ceph odd pool set data min_size 2
ceph odd pool set rbd size 2
ceph odd pool set rbd min_size 2
ceph odd pool set metadata size 2
ceph odd pool set metadata min_size 2
Once you do this your ceph cluster should go to a healthy state.
Regards,
Matt
On 2 Aug 2014, at 12:57 am, [email protected]<mailto:[email protected]>
wrote:
Dell - Internal Use - Confidential
Hello Ceph Experts :) ,
I am using ceph ( ceph version 0.56.6) on Suse linux.
I created a simple cluster with one monitor server and two OSDs .
The conf file is attached
When start my cluster - and do "ceph -s" - I see following message
$ceph -s"
health HEALTH_WARN 202 pgs stuck inactive; 202 pgs stuck unclean
monmap e1: 1 mons at {slesceph1=160.110.73.200:6789/0}, election epoch 1,
quorum 0 slesceph1
osdmap e56: 2 osds: 2 up, 2 in
pgmap v100: 202 pgs: 202 creating; 0 bytes data, 10305 MB used, 71574 MB /
81880 MB avail
mdsmap e1: 0/0/1 up
Basically there is some problem with my placement groups - they are forever
stuck in "creating" state and there is no OSD associated with them ( despite
having two OSD's that are up and in" ) - when I do a ceph pg stat" I see as
follows
$ceph pg stat
v100: 202 pgs: 202 creating; 0 bytes data, 10305 MB used, 71574 MB / 81880 MB
avail
if I query any individual pg - then I see it isn't mapped to any OSD
$ ceph pg 0.d query
pgid currently maps to no osd
I tried restaring OSDs and tuning my configuration without any avail
Any suggestions ?
Yogesh Devi
<ceph.conf>_______________________________________________
ceph-users mailing list
[email protected]<mailto:[email protected]>
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
